Table of Contents
Advertisement
Click Apply at the bottom of the screen to save the above configuration.
Firmware Upgrade
Enable automatic firmware update: When enabled the router will periodically check if
a new firmware is available. If a new firmware is detected the router will give a
notification.
Firmware Upgrade: This tool allows you to upgrade the Broadband router's system
firmware. To upgrade the firmware of your Broadband router, you need to download the
firmware file to your local hard disk, and enter that file name and path in the appropriate
field on this page. You can also use the Browse button to find the firmware file on your
PC.
Once you've selected the new firmware file, click Apply at the bottom of the screen to
start the upgrade process.
Backup Settings
The Backup screen allows you to save (Backup) the current configuration settings. When
you save the configuration setting (Backup) you can re-load the saved configuration into
the router through the Restore selection. If extreme problems occur you can use the
Restore to Factory Defaults selection, this will set all configurations to its original default
settings (e.g. when you first purchased the router).
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the X6 N900 and is the answer not in the manual?
Questions and answers