Table of Contents
Advertisement
SNTP Server Address Setup (Option 18)
The default SNTP Server Address is set upon shipment from the manufacturer.
The SNTP server IP Address can be obtained from the DHCP server if that
option is provided. In order to change the address, follow the steps below:
1. Press OPTIONS, numeric key, "1", "8", then ENTER.
3
2. Press ENTER.
3. Enter 4 digits of numeric password (see User Password Registration in
chapter 4). Then, ENTER.
Factory Default User Password - 9999
4. To overwrite, enter the SNTP server IP address. Press "#" key when the
input of a period (.) is required. In case of no support, press CLEAR to
make this section blank.
5. Press ENTER.
Press either asterisk (*) to go back to sub-menu or OPTIONS to exit the
option menu.
Note:
If this option is used and the Telephone shows a "?" in the Date & Time
display, the SNTP Server and the Telephone have not established a
connection.
3-18
SNTP ADR REGISTRATION
ENTER USER PASSWORD
ENTER USER PASSWORD
****
ENTER SNTP ADDRESS
NT=10.36.213.210
COMPLETED
Advertisement
Table of Contents
