Update Software; Update Software Via The Internet; Update Software Via Usb - Philips BDP7750 User Manual

3
Connect the USB storage device to the
(USB) connector on this player.
4
Press , and select [Setup].
5
Select [Advanced] > [Software update]>
[USB].
» If an upgrade media is detected, you
are prompted to start the update.
6
Follow the instructions on the TV screen
to update the software.
» When the update is complete, this
player automatically turns off and on
again.
Caution
•
Do not turn off the power or remove the USB storage
device when the software update is in progress because
you might damage this player.
22 EN
5 Specifications
Note
•
Specifications are subject to change without notice
Region code
This player can play discs with the following
region codes.
DVD Blu-ray
Playable media
• BD-Video, BD 3D
• DVD-Video, DVD+R/+RW, DVD-R/-RW,
DVD+R/-R DL (Dual Layer)
• VCD/SVCD
• Audio CD, CD-R/CD-RW, MP3 media,
WMA media, JPEG files
• DivX (Ultra)/DivX Plus HD media, MKV
media
• USB storage device
File container
• Video: .avi, .divx, .mp4/m4v, .mkv, .asf/wmv,
.mpg/mpeg, .m2ts
• Audio: .aac/m4a, .mp3, .wma, .mka
• Picture: .jpg, .gif, .png
Video
• Signal system: PAL / NTSC
• Composite video output: 1 Vp-p (75 ohm)
• HDMI output: 480i/576i, 480p/576p, 720p,
1080i, 1080p, 1080p/24Hz, 4KX2K
Audio
• 2 Channel analog output
• Audio Front L + R : 2 Vrms (> 1 kohm)
• 7.1 Channel analog output
• Audio Front L + R : 2 Vrms (> 1 kohm)
• Audio Surrond L + R :
2 Vrms (> 1 kohm)
• Audio Center : 2 Vrms (> 1 kohm)
• Audio Subwoofer : 1.15 Vrms (> 1 kohm)
• Audio Rear L + R: 2 Vrms (> 1 kohm)
Countries
Europe, United
Kingdom