Sanyo PLC-WXU30 Owner's Manual page 249

Description of warning value
Warning Column
Un-connected
Connect Connected *
Acquisition error
Power failuer
TemperatureError(OnCoolingDow
n)
TemperatureError
NormalAfterTempError
RS232CFailure
Power management(OnCoolingDo
wn)
Power status
Power management
Shutter management(On cooling) Cooling down after projector lamp was off with the shutter
Shutter management
LampFailure(OnCoolingDown)
LampFailure
Normal(Standby) *
Normal(OnCoolingDown) *
SignalIsInterrupted
Input signal status
SignalIsInputted *
Inside Temperature status (A to
C] Abnormal
External Temperature status
ON *
Lamp status Failure
Replace
Lamp time (lamp time)
Filter status Clogged
Filter time (filter time)
Clogged
Option Box filter status
Error
Option Box filter time (filter time)
(Auto play error) Error
(Mail error)
n/a
(System error)
The column order and width of the event log window are saved to the registry of the computer.
Up to 1000 of events can be stored. If it exceeds 1000 events, the oldest event is deleted and the
latest event is added. The event log can be saved to the management file.
Description of Event, Type, Warning column, Warning value
Warning Value
Projector has been disconnected from the network
Projector has been connected to the network
PJ Network Manager could not acquire the MIB information
from the equipment
Projector turned off due to the power failure of the projector
On Cooling down due to temperature error occurred
The projector turned off due to temperature error occurred
Normal after temperature error occurred
The RS-232C communication error occurred
Cooling down after projector lamp was off with the power
management function
The power management function turned projector lamp off
management function
The shutter management function turned projector lamp off
Cooling down after the lamp failure occurred
The lamp failure occurred
Projector turned into standby normally
On cooling down normally due to projector turned off
The signal was interrupted
The signal was inputted again
The projector turned off when the temperature was
abnormally high
When the lamp is on
When the lamp failed to ignite.
It reached lamp replacing time.
It reached user setting lamp replacing time
Filter was clogged
It reached user setting filter time
Filter was clogged
The option box filter had an abnormality
It reached user setting option box filter time
The error occurred during the auto image display
PJ Network Manager could not send mail
PJ Network Manager could not acquire the memory
The warning value with "*" in the above table shows the
event when the alert has cleared, alert type is "OFF".
Description
PJ NETWORK MANAGER
OWNER'S MANUAL
23