Installation
14.8 Switching to 18 kW electric heater
power.
CTC EcoZenith i250 3x400 V can be reconnected to a 18 kW immersion
heater.
NB: Installation must be carried out by a qualified electrician.
Connecting
1. Begin by disconnecting the power to the product.
2. Free the three black wires with insulation sleeves from the cabling.
3. Undo the smallest switch (K2 on the electrical diagram) by pulling the yel-
low fastening backwards.
90
CTC EcoZenith i250
!
Warning Begin
by disconnecting
the power to the
product. Installation
must be carried
out by a qualified
electrician.