Switching The Headset On And Off; Bluetooth Pairing; Managing Phone Calls; Answering Calls - Peltor WS SportTac Manual

EN
Warning: Use only original charger. Use of another charger can damage the
headset.
Warning: Do NOT charge alkaline batteries as this may damage the headset.
Max charging temperature: +40 °

3:3 Switching the headset on and off

Press and hold the On/Off/Mode button (A:13) for two seconds to switch the
headset on or off.

3:4 Bluetooth pairing

The headset can be paired with and connected to Bluetooth units that support
A2DP, HFP and HSP profiles.
NOTE that you can only stream stereo sound/music from a unit (mobile phone,
computer, etc.) that supports the A2DP Bluetooth profile.
• Ensure that the headset is charged and switched off.
• Press and hold the On/Off/Mode button (A:13) for five seconds.
This puts the headset into pairing mode, which is confirmed by repeated
voice message:
• Activate your telephone's Bluetooth function and search for new units.
After a few seconds "Peltor WS5" will appear on the screen.
• Select "Peltor WS5".
• If the phone asks you for a password, enter: 0000
• Pairing is confirmed when you hear the voice message:
complete".
Once the Bluetooth pairing function is activated it will automatically establish
connection with the headset next time it is used with a confirmation voice
message "connecting Bluetooth", and then:
units are connected. You can pair and store up to 4 units. The headset will
automatically try to connect to the most recently connected unit first.

3:5 Managing phone calls

To manage phone calls, the headset must be paired with and connected to a
mobile phone with Bluetooth capability, see Bluetooth pairing.

Answering calls

Incoming phone calls are indicated with a ring tone in the headset. Answer by
pressing briefly on the Bluetooth button (A:16).
Rejecting a call
Reject a call by pressing and holding the Bluetooth button (A:16).
Voice dial
Press briefly on the Bluetooth button (A:16).
Redial
Press and hold the Bluetooth button for 2 seconds (A:16).
3:6 Adjusting surround-sound volume
Increase volume. Press the (upper) + button (A:14).
Decrease volume. Press the (lower) – button (A:14).
3:7 Adjusting call volume
You can adjust volume during a call by pressing the (+) or (–) buttons. Press
the On/Off/Mode button (A:13) and then (+) or (–) to adjust the surround-sound
volume during a call.
3:8 Adjusting streamed-music volume
You can adjust volume while streaming music by pressing the (+) or (–) buttons.
Press briefly on the On/Off/Mode button (A:13) and then (+) or (–) to adjust the
surround-sound volume during music streaming.
"Bluetooth pairing mode".
4
"pairing
"connected" when the