Receiving Radio Broadcasts; Tuning In To Stations Manually; Using Preset Tuning - JVC rx-7032vsl Instruction Manual

Receiving Radio Broadcasts

You can browse through all the stations or use the preset function to go immediately to a particular station.

Tuning in to Stations Manually

1. Press FM or AM to select the band.
The last received station of the selected band is tuned in.
ANALOG
L R LINEAR PCM
SUBWFR
2. Press FM/AM TUNING 5 or ∞ repeatedly until
you find the frequency you want.
• Pressing FM/AM TUNING 5 increases the frequency.
• Pressing FM/AM TUNING ∞ decreases the frequency.
ANALOG
L R LINEAR PCM
SUBWFR
Notes:
• When a station of sufficient signal strength is tuned in, the TUNED
indicator lights up on the display.
• When an FM stereo program is received, the STEREO indicator
also lights up.
• When you hold and then release the button in step 2 , the frequency
keeps changing until a station is tuned in.
RX-7032V AUDIO/VIDEO CONTROL RECEIVER
TUNED STEREO
SPEAKERS 1
VOLUME
TUNED STEREO
SPEAKERS 1
VOLUME
Remote

Using Preset Tuning

NOT
Once a station is assigned to a channel number, the station can be
quickly tuned in. You can preset up to 30 FM and 15 AM (MW)
stations.
To store the preset stations
Before you start, remember...
There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step 2 again.
On the front panel ONLY:
1. Tune in the station you want to preset
(see "Tuning in to Stations Manually"
on the left).
• If you want to store the FM reception mode for this station,
select the FM reception mode you want. See "Selecting the
FM Reception Mode" on page 21.
2. Press MEMORY.
ANALOG
L R LINEAR PCM
SUBWFR
The channel number position starts flashing on the display for
about 10 seconds.
3. Press FM/AM PRESET 5 or ∞ to select a
channel number while the channel number
position is flashing.
ANALOG
L R LINEAR PCM
SUBWFR
4. Press MEMORY again while the selected channel
number is flashing on the display.
The selected channel number stops flashing.
The station is assigned to the selected channel number.
5. Repeat steps 1 to 4 until you store all the stations
you want.
To erase a stored preset station
Storing a new station on a used number erases the previously stored
one
RX-7032V AUDIO/VIDEO CONTROL RECEIVER
TUNED STEREO
SPEAKERS 1
VOLUME
TUNED STEREO
SPEAKERS 1
VOLUME
20