Russell Hobbs COMPACT CYCLONIC Instructions, Troubleshooting Manual And Guarantee

Russell Hobbs COMPACT CYCLONIC Instructions, Troubleshooting Manual And Guarantee

Advertisement

Quick Links

instructions, troubleshooting guide, and guarantee
Problems?
Don't take it back to the shop,
they won't be able to fix it.
Ring the helpline
0845 658 9700
it's a local rate number

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the COMPACT CYCLONIC and is the answer not in the manual?

Questions and answers

Summary of Contents for Russell Hobbs COMPACT CYCLONIC

  • Page 1 instructions, troubleshooting guide, and guarantee Problems? Don’t take it back to the shop, they won’t be able to fix it. Ring the helpline 0845 658 9700 it’s a local rate number...
  • Page 3: Important Safeguards

    Read the instructions, keep them safe, pass them on if you pass the appliance on. Remove all packaging before use. A IMPORTANT SAFEGUARDS Follow basic safety precautions, including: 1 The cleaner should only be used by or under the supervision of a responsible adult. It’s not a toy –...
  • Page 4: Suction Control

    C CARRYING AND MOVING THE CLEANER 6 Lift the cleaner only by the carrying handle. 7 Don’t sit it upright – it’ll fall over. 8 You may move the cleaner around by pulling gently (that’s gently), on the hose. C CHOOSE THE TOOL FOR THE JOB 9 The tools will fit on the nozzle, or the narrow end of either tube.
  • Page 5 C CHECKING THE FILTERS 30 Spread out some newspaper, and wear rubber gloves. 31 Check the filters before closing the bin and replacing it in the cleaner. , All filters must be completely dry before being replaced in the cleaner. C HEPA FILTER &...
  • Page 6 C DON’T PANIC! If the cleaner starts to get noisy and you start to lose suction, don’t worry, it’s not the end of the world, you’ve probably just blocked it. 1 Switch the cleaner off and unplug it. 2 Spread out some newspaper. 3 If you’re using one of the tools, remove and check it first.
  • Page 8: Environmental Protection

    D UK WIRING INSTRUCTIONS The cleaner doesn’t need an earth. It has a 13A BS1362 fuse in a 13A BS1363 plug. To replace the plug, fit the blue wire to N, and the brown wire to L. Fit the cord grip. If in doubt, call an electrician.

Table of Contents