Related Manuals for ALDI WSD 3.6-1
Summary of Contents for ALDI WSD 3.6-1
- Page 1 User Manual Spend a little Live a lot. 3.6 V LI-ION SCREWDRIVER WSD 3.6-1 Translation of the original user manual ID: #05007...
- Page 2 Try it out now Just scan the QR code with your smartphone and find out more about the Aldi product you have purchased.* Your Aldi Service Portal All details mentioned above can also be found in the Aldi Service Portal at www.aldi.co.uk.
-
Page 3: Table Of Contents
Contents Overview ................ 4 Use ................... 5 Scope of delivery/device parts ........6 General information ............7 Reading and storing the instruction manual ....7 Explanation of symbols ........... 8 Safety ................11 Proper use ................11 Safety notes ...............11 First use ................. 21 Checking the cordless screwdriver and product contents ............. -
Page 5: Use
PH0 PH1 PH2 PH2 PH3 PH0 PH1 PH2 PH3 PZ2 PZ2 PZ2 T20 T27... -
Page 6: Scope Of Delivery/Device Parts
Scope of delivery/device parts 3.6 V LI-ION Screwdriver Screwdriver handle Charging slot LED charge level indicator On/Off switch with built-in light switch Right-handed/left-handed rotation selector Bit receptacle LED working light Storage bag Mains adapter/charger Bits, 27× Magnetic bit holder... -
Page 7: General Information
General information General information Reading and storing the instruction manual This instruction manual accompanies this 3.6 V LI-ION screwdriver. It contains important infor- mation on start-up and handling. For improved readability, the 3.6 V LI-ION screwdriver will be referred to only as the “cordless screwdriver” in this instruction manual. -
Page 8: Explanation Of Symbols
General information Explanation of symbols The following symbols and signal words are used in this instruction manual or on the packaging. WARNING! This signal word designates a hazard with moderate degree of risk which may lead to death or severe injury if not avoided. - Page 9 General information Do not expose the rechargeable battery to temperatures above 50 °C! max. 50°C Avoid contact between the recharge- able battery and water! Do not throw the rechargeable battery in water! Danger of explosion! Do not throw the rechargeable battery in the toilet.
- Page 10 General information Voluntary “Certified Safety” seal of quality. Direct voltage. 3 years of manufacturer warranty YEAR WARRANTY Important! Observe the instruction manual! Important! Read the instruction man- ual for the charger! AFTER SALES meister-service@meister-werkzeuge. de 00800 34 99 67 53 SUPPORT...
-
Page 11: Safety
Safety Safety Proper use The cordless screwdriver is only designed for light screw driving. The cordless screwdriver is only intended for private use and not suitable for commercial purposes. Only use the cordless screwdriver as described in this instruction manual. Any other use is considered im- proper and may result in damage to property. -
Page 12: Electrical Safety
Safety Power tools may produce sparks that could ignite dust or vapours. c) Keep children and other persons away from the power tool while you are using it. If you are distracted, you could lose control of the device. Electrical safety a) The device plug for the mains adapter/charger must fit in the socket. - Page 13 Safety e) If you are working with a power tool outdoors, only use extension cords that are also suitable for outdoor use. If operating the power tool in a damp environ- ment cannot be avoided, use a fault-current cir- cuit breaker. Using a fault-current circuit breaker reduces the risk of an electric shock.
- Page 14 Safety d) Remove all adjusting tools or spanners before you switch the power tool on. A tool or spanner in contact with a rotating part of the device may result in injury. e) Avoid an abnormal posture. Maintain a safe standing position and keep your balance at all times.
- Page 15 Safety Using and handling the power tool a) Do not overload the device. Use the right power tool for your work. The right power tool will ensure that you work more effectively and safely within the specified power range. b) Do not use a power tool if its switch is defective. A power tool that can no longer be switched on or off is dangerous and must be repaired.
- Page 16 Safety g) Use the power tool, accessories, insertion tools etc. in accordance with these instructions. At the same time, consider the working conditions and the work to be performed. Using power tools for applications other than the intended ones may result in dangerous situations.
- Page 17 Safety Service a) Only have your power tool repaired by a qual- ified professional and only with original spare parts. This will ensure that the safety of the power tool is not compromised. Special safety notes for power screwdrivers a) Hold the device by the insulated handle surfac- es when performing work where there is a risk of the screw coming into contact with hidden power lines.
- Page 18 Safety they do not play with the device. − If the mains connection line of this device is damaged, it must be replaced by the manufacturer, its customer service de- partment or a similarly qualified person in order to prevent risks. −...
- Page 19 Safety d) Never connect a rechargeable battery that has burst or been otherwise damaged with the charger. Otherwise there is a risk of electric shock. e) Do not in any case dismantle the charger. Repairs may only be performed by an authorised technical support team.
- Page 20 Safety Do not attempt to charge the rechargeable battery with a charger other than the enclosed one. The charger shipped with this power tool and the re- chargeable battery pack must be used together. m) Only use the charger to charge the rechargeable battery pack.
-
Page 21: First Use
First use Further safety notes NOTICE! Risk of damage! Improper handling of the cordless screw- driver or rechargeable battery may result in damage to the cordless screwdriver. − Never place the cordless screwdriver or the accessories on or near hot surfaces (e.g. -
Page 22: Charging The Rechargeable Battery
First use 1. Check to make sure that the delivery is complete (see fig. A – D). 2. Take the cordless screwdriver out of the packaging and check whether the cordless screwdriver or the individual parts exhibit damages. If this is the case, do not use the cordless screwdriver. - Page 23 First use NOTICE! Risk of damage! Failure to properly charge the recharge- able battery may damage the rechargeable battery, the charger and the cordless screw- driver. − Charge the rechargeable battery at an ambient temperature between 0 °C and 45 °C. The ideal temperature for charg- ing the rechargeable battery is approx.
- Page 24 First use Rechargeable batteries based on Lithium- Ion technology (Li-Ion) offer clear advan- tages when compared to conventional Ni- Cd rechargeable batteries: • No memory effect. The rechargeable battery can be recharged at any time re- gardless of the charge level and without any loss of capacitance.
-
Page 25: Operation And Functioning
Operation and functioning 4. Disconnect the charger from the mains after 3 hours. 5. Pull the mains plug out of the charger. 6. Let the cordless screwdriver cool down to room temperature if was heating up during the charging process. The cordless screwdriver is now operational. -
Page 26: Led Working Light
Operation and functioning Pay attention while driving in screws and stop before the screw head is drawn into the workpiece. Use a hand screwdriver to tight- en the screw. Drive in a few test screws in to get a feeling for operating the power tool. •... -
Page 27: Determining The Direction Of Rotation
Operation and functioning and safety when working in low-light areas. The work- ing light goes out when the On/Off switch is released. Determining the direction of rotation You can use the cordless screwdriver to drive screws in and remove them. Proceed as follows to set the direction of rotation: 1. -
Page 28: Troubleshooting
Troubleshooting Troubleshooting Some problems may be caused by minor faults that you can fix yourself. To do so, follow the instructions in the following table. If it is still not possible to resolve the problem with the cordless screwdriver, contact customer service. Do not in any case attempt to repair the cordless screw- driver yourself. - Page 29 Troubleshooting Problem Possible cause Solution The re- The charger has Insert the charging chargea- not been prop- plug straightly and ble battery erly attached. all the way into the does not charging slot charge. of the cordless screwdriver. The mains plug Check to make sure has not been in- that the mains plug is...
-
Page 30: Repairs
Repairs Repairs WARNING! Risk of electric shock! Repairs performed by the user or the use of unsuitable spare parts to repair the device poses an increased risk of electric shock. − Do not open the housing. Liability and warranty claims are waived in the event of repairs performed by the user, im- proper connection of the device or in- correct operation. -
Page 31: Cleaning And Storage
Cleaning and storage Cleaning and storage Do not use any aggressive cleaners or solvents for cleaning. − Only clean the housing of the cordless screwdriver with a dry, soft cloth. − Remove any stubborn dirt with a damp cloth and a mild detergent. -
Page 32: Technical Data
Technical data Technical data 3.6 V LI-ION Screwdriver Model: WSD 3.6-1 Article number: 5902233 Idle speed: 200 min Bit receptacle: 6.35 mm (1/4˝) Rechargeable battery Voltage: 3.6 V Capacity: 1.5 Ah Type: Lithium-ion rechargeable bat- Charging time: tery (LI-ION) approx. 3 hours... -
Page 33: Noise And Vibration Information
Noise and vibration information Noise emissions Sound power level L 64.83 dB(A) Uncertainty K 3 dB(A) Sound pressure level L 53.83 dB(A) Uncertainty K 3 dB(A) Hand-arm vibration Screwing a < 2.5 (0.195) m/s2 Uncertainty K: 1.5 m/s2 Noise and vibration information The specified noise and vibration levels were deter- mined in accordance with the standards EN 60745-1 and EN 60745-2-2. - Page 34 Noise and vibration information CAUTION! Risk of injury due to vibrations! While actually using the power tool, the vi- bration emission value may differ from the specified value depending on how the pow- er tool is used. − Define safety precautions to protect the user.
-
Page 35: Disposal
Disposal CAUTION! Noise disturbance! This device causes a certain unavoidable noise disturbance. − Perform noisy work during the permis- sible hours of the day designated for work of this kind. − If necessary, observe quiet hours and re- strict the duration of work to the essen- tials. - Page 36 Disposal Old devices must not be disposed of with household waste! If the cordless screwdriver can no longer be used, every user is required by law to dispose of old devices separately from their household waste, e.g. at a collec- tion point in his community/borough.
-
Page 37: Declaration Of Conformity
Meister Werkzeuge gmbH • Oberkamper Str. 37-39 • D-42349 Wuppertal EC-Declaration of Conformity 3.6V LI-ION SCREWDRIVER For the following product ... WORKZONE Nr. 5902233 • 10/2015 • 92673 Screwdriver WSD 3.6-1 Charger IVP0550-0700B … is herewith declared to conform with the following guidelines: 2006/42/EC 2006/95/EC 2004/108/EC... - Page 38 AFTER SALES meister-service@meister-werkzeuge. de 00800 34 99 67 53 SUPPORT...
-
Page 39: Warranty Card
00800 34 99 67 53 are requested to return the faulty product meister-service@meister-werkzeuge.de please return the com- pleted warranty card Model: WSD 3.6-1 · 5902233 10/2015 together with it. Product code: 92673 Meister Werkzeuge Gmbh Hotline: Kundenservice Free hotline. -
Page 40: Warranty Conditions
Warranty conditions Dear Customer, The ALDI warranty offers you extensive benefits: Warranty period: 3 years from date of purchase. 6 months for wear parts and con- sumables under normal and proper conditions of use (e.g. rechargeable batteries). Costs: Free repair/exchange. - Page 41 The warranty does not cover damage caused by: • Accident or unanticipated events (e.g. light- ning, water, fire). • Improper use or transport. • Disregard of the safety and maintenance in- structions. • Other improper treatment or modification. After the expiry of the warranty period, you still have the possibility to have your product repaired at your own ex- pense.
- Page 42 PRODUCED IN CHINA FOR: ALDI STORES LTD. PO BOX 26, ATHERSTONE WARWICKSHIRE, CV9 2SH ALDI STORES (IRELAND) LTD. PO BOX 726, NAAS, CO. KILDARE.
Need help?
Do you have a question about the WSD 3.6-1 and is the answer not in the manual?
Questions and answers