Pushing The Machine By Hand - Toro Proline 30187 Operator's Manual

Mid–size traction unit proline hydro 15hp

Hide thumbs Also See for Proline 30187:

Table of Contents

Enlarged version

• Secure a trailer to towing vehicle with safety chains.

Important

If the machine is loaded on a truck or trailer

for transport, securely restrain the machine to prevent

movement.

Pushing the Machine by Hand

The by–pass valve also allows the machine to be pushed by

hand with the engine not running for easier servicing. If the

by–pass valve is opened to push the machine by hand,

adjustment is required for operation.

Important

Always push the machine by hand. Never

tow the machine because hydraulic damage may occur.

To Push the Machine

1. Disengage the power take off (PTO) and turn the

ignition key to off.

2. Loosen jam nuts and rotate by-pass valves open 5 turns

to push. This allows hydraulic fluid to by-pass the pump

and the wheels to turn (Figure 15).

Important

Rotate by-pass valve a maximum of 5 turns

so the valve does not come out of the body causing fluid to

run out.

To Operate the Machine

If the by–pass valve is opened to push the machine by

hand, adjustment is required for operation. Refer to

Adjusting the By-pass Valve on page 27.

Note: The machine will not drive unless by-pass valves are

properly adjusted.

Figure 15

1. By-pass valve

m–3098

2. Jam nut

Table of Contents