Tuning With The Dji Assistant Software For Pc/Mac - dji Ronin-MX User Manual

Ronin-MX User Manual

Tuning with the DJI Assistant Software for PC/MAC

You can also tune the Ronin-MX and upgrade the firmware through the DJI Assistant
software for PC or MAC.
The configuration settings in the DJI Assistant app and the DJI Assistant software
NOTICE
for PC/MAC are automatically synced. There is no need to adjust the settings in
both the mobile app and the desktop software.
The DJI Assistant app and the DJI Assistant software for PC/MAC cannot be
connected to the Ronin-MX at the same time. If running the mobile app, be sure
to disconnect the Micro USB cable before using the desktop software.
Installing the DJI Assistant Software for PC/MAC
Installing and Running on Windows
1. Download the DJI WIN DRIVER INSTALLER from the Ronin-MX product page on DJI.com.
Connect the Ronin-MX to your PC via the provided USB cable and be sure the Ronin-MX
is powered on prior to installing the DJI WIN DRIVER.
2. Download the appropriate Assistant installer from DJI.com.
3. Double click the Assistant installer and follow the steps to finish the installation.
4. Run the Assistant.
5. Upgrade the firmware or configure parameters using the Assistant as needed.
The Assistant installer supports Windows XP or above.
TIPS
Installing and Running on Mac OS X
1. Download the Assistant installer (.DMG) from the Ronin-MX product page on DJI.com.
2. Run the installer and follow the prompts to finish the installation.
26
©
2016 DJI All Rights Reserved.