Related Manuals for Sunny SF-T4400
Summary of Contents for Sunny SF-T4400
- Page 1 SF-T4400 TREADMILL USER MANUAL IMPORTANT: Read all instructions carefully before using this product. Retain owner’s manual for future reference. For customer service, please contact: support@sunnyhealthfitness.com...
-
Page 2: Important Safety Information
IMPORTANT SAFETY INFORMATION We thank you for choosing our product. To ensure your safety and health, please use this equipment correctly. It is important to read this entire manual before assembling and using the equipment. Safe and effective use can only be assured if the equipment is assembled, maintained, and used properly. -
Page 3: Important Note
IMPORTANT OPERATION INSTRUCTIONS 1. Insert the power plug directly into the socket. 2. The constant running time for this machine is less than 2 hours. Be sure to read the manual before operating the equipment. 3. Changes in speed do not occur immediately. Set your desired speed using the adjustment keys on the main console. -
Page 4: Exploded Drawing
EXPLODED DRAWING... -
Page 5: Parts List
PARTS LIST Description Specification Description Specification Base Frame Allen Screw M8*30 Main Frame Allen Socket Bolt M8*40 Computer Bracket Allen Socket Bolt M8*40 Left Upright Allen Socket Bolt M8*45 Right Upright Allen Socket Screw M10*35 Motor Bracket Allen Socket Bolt M6*55 Fixing Pin Allen Socket Screw... -
Page 6: Assembly Hardware
ASSEMBLY HARDWARE CARTON CONTENTS: Description Specification Qty Description Specification Qty Main Frame Allen Screw M8*15 Spanner w/ screw driver S=13,14,15 Washer Allen wrench Safety Key Left Upright Tube Cover Lubricant Oil Right Upright Tube Cover TOOLS Allen Wrench (5mm) Spanner with Screw Driver (S=13, 14, 15) -
Page 7: Assembly Instructions
ASSEMBLY INSTRUCTIONS STEP 1: Open carton remove contents. Place the Main Frame (No. 2) on level ground, ensure that you have a work area that is clean and has adequate space. STEP 2: Lift Console Cover (No. 14) “Section A” along with Upright Tubes (No. - Page 8 ASSEMBLY INSTRUCTIONS STEP 4: Fix the Console (No. 22) to the Main Frame (No. 2) using 4 Bolts (No. 39) and Washers (No. 55), secure using Allen Wrench (No. 12). Next, tighten the two already preassembled Bolts (No. 42) located on the inner sides of the left and right handlebar.
-
Page 9: Maintenance And Care
MAINTENANCE & CARE General cleaning will help prolong the life and performance of your treadmill. Keep the unit clean and maintained by dusting the components on a regular basis. Clean both sides of the running belt to prevent dust from accumulating underneath the belt. Keep your running shoes clean so that dirt from your shoes do not wear out the running board and belt. -
Page 10: Lubricating The Treadmill
LUBRICATING THE TREADMILL *IMPORTANT NOTE: You will need to lubricate your treadmill before the first use. RUNNING BELTS & TREADMILL LUBRICANT: Lubricating the running board and running belt is essential as the friction between the two affects the life span and function of the treadmill, therefore it is suggested that the running board and belt be inspected regularly. -
Page 11: Folding Instructions
FOLDING INSTRUCTIONS FOLDING: Place your hand at position “A” and lift up on the Base Frame (No. 1) until the Air Pressure Cylinder (No. 13) “B” locks into the tube. NOTE: When Pressure Cylinder (No. 13) successfully locks into the tube, you will hear a clicking sound. -
Page 12: How To Move The Machine
HOW TO MOVE THE MACHINE Before attempting to move the treadmill, please make sure that been properly folded. Remove power cord. To tilt, start by placing one hand at position “A” to support the top end of the treadmill. Next, place one foot at position “B”... -
Page 13: Adjusting The Incline
ADJUSTING THE INCLINE There are three holes located on the Adjustable Foot Pad (No. 29). To adjust the level of incline, remove the two Fixing Pins (No. 7) from the left and right side. Align the holes of the Adjustable Foot Pad (No. 29) to the holes located on the Main Frame (No. 2) once you’ve locate your desired incline level and insert the Fixing Pins (No. -
Page 14: Important Electrical Information
IMPORTANT ELECTRICAL INFORMATION WARNING: This treadmill requires a power source of 18 amps (110 Volts) in order to properly operate. For your safety, as well as the safety of others, please verify that the power source is correct before plugging the equipment. Any power source above or below this level could cause significant damage to the equipment and or user. -
Page 15: The Display Console
THE DISPLAY CONSOLE QUICK START: 1. Insert the magnet end of the safety key into the computer console. 2. Press the START button, and the system will automatically display a 3 second countdown. Once the countdown reaches zero, the running belt will start at the initial default speed of 0.5 MPH. - Page 16 THE DISPLAY CONSOLE FUNCTIONS: 1. SPEED: Displays the current speed (The speed range on this treadmill is 0.5 - 9 MPH) When setting PROGRAMS, the speed is programmed in intervals; PROGRAMS are from P1-P9. 2. TIME: Displays the time elapsed (0:00-99:59 MINS). If the time reaches 99:59, the machine will stop smoothly and display “End”...
-
Page 17: Function Keys
THE DISPLAY CONSOLE FUNCTION KEYS: 1. PROGRAM: Press the PROGRAM button to set your desired interval setting. Programs are displayed as P1-P9 and the various intervals are shown on the face of the treadmill. 2. MODE: Press this button to select a MODE. Pressing once will enter H1, the TIME countdown mode starting from 10:00 MINS, H2 is the DISTANCE countdown mode starting from 1 MILE, and H3 is the CALORIES countdown mode which starts from 50 KCAL. - Page 18 THE DISPLAY CONSOLE BODY QUALITY CALCULATION: Press the PROGRAM button until the window displays FAT to access Body Quality Calculation. Press MODE to enter F-1, F-2, F-3, F-4, F-5 F-1 SEX, F-2 AGE, F-3 HEIGHT, F-4 WEIGHT, F-5 is Body Quality Index Press SPEED +/- BUTTONS to set F1-F4 (refer to the chart below).
- Page 19 TREADMILL FUNCTIONS SAFETY LOCK FUNCTION: Removing the Safety Key (No. 66) from the computer console while the treadmill is running will cause it to stop immediately. Once the treadmill reaches a full stop, the window display of the computer will show “- - -“ and the buzzer will beep 3 times. To start the treadmill again, insert the magnet end of the Safety Key (No.
-
Page 20: Getting Started
EXERCISE INSTRUCTIONS GETTING STARTED: Before starting any exercise program, you should consult your physician to determine if you have any medical or physical conditions that could put your health and safety at risk or prevent you from using the equipment properly. Be aware of your body’s signals. Incorrect or excessive exercise can damage your health. -
Page 21: Troubleshooting
TROUBLESHOOTING PROBLEM CAUSE CORRECTION Not plugged in Plug cord into outlet Treadmill will not start Safety Key not inserted Insert Safety Key Not calibrated correctly Re-calibrate speed setting Running speed inaccurate Speed set in the wrong Change setting to proper Units of measurement Units.
Need help?
Do you have a question about the SF-T4400 and is the answer not in the manual?
Questions and answers