Registering An Additional Cordless Audio Conferencing Unit - Motorola AC1000 User Manual

8.9.1

Registering an additional cordless audio conferencing unit

NOTE
The battery must be fully charged before you start to register. Hold your cordless audio
conferencing unit close to the base during the registration process. Handsets that were
supplied with your AC1000 base are already preregistered.
On the underside of the base:
P
1. Press and hold
registration mode for 90 seconds.
On the cordless audio conferencing unit:
1. Press Menu, scroll
d
2. Scroll to Set Base
d
3. Scroll to Registration
4. Register Handset
5. Enter the system PIN and press OK.
6. When registration is successful the display shows
confirmation beep (if your confirmation tone is set to on).
NOTE
If registration is not successful the first time, please repeat the process again in case the
base registration period ran out of time. If the base is not found after a few seconds, the
cordless audio conferencing unit returns to standby. Try registering again. If there are
already 5 cordless audio conferencing units registered to the base, registration will fail. You
must de-register a cordless audio conferencing unit before you can register a new one.
8.9.2 De-register a cordless audio conferencing unit
Use one cordless audio conferencing unit to de-register another. You cannot de-register
the cordless audio conferencing unit that you are using.
1. Press Menu, scroll
d
2. Scroll to Set Base
d
3. Scroll to Registration
d
4. Scroll to Deregister HS
d
u
5. Scroll or to the cordless audio conferencing unit you want to de-register and press
Select.
6. Enter the system PIN, then press
e
7. Press to return to standby.
Base settings
on the underside of the base for 5 seconds. The base will remain in
d
to Settings and press Select.
and press Select.
and press Select.
is highlighted. Press Select.
d
to Settings and press Select.
and press Select.
and press Select.
and press Select.
OK to delete the unit you want to de-register.
Handset Registered and you hear a
33