Table of Contents
Advertisement
22
BT Call Guardian
How do I change the different BT Call Guardian modes?
Your BT4600 has two Call Guardian settings, Announce and Answer phone.
To change to Announce or Answer phone:
1. In idle mode, press
2. BT Call Guardian menu is shown. Press OK.
3. Scroll to Guardian Mode, press OK and then select the mode you want to use and
press OK.
Switch BT Call Guardian on/off
When Call Guardian is set to On, it is On for whichever mode you're using (e.g.
Announce mode). If you turn Call Guardian Off, all calls will be allowed through,
even if they are already on your blocked list.
1. In idle mode, press
2. BT Call Guardian menu is shown. Press OK.
3. On/Off is displayed. Press OK, then press
press OK.
When you receive a call with Call Guardian switched on you will hear the
message, 'You have a call from xxxx. To accept the call press 1. To always accept
their call, press 2. To block their call, press 3. To send the call to answer phone,
press 4. To hear these options again, press
.
.
If you need some help, call us on 0800 145 6789* or go to bt.com/producthelp
or
to select either On or Off and
*
'.
- Quick Links:
- Quick Set up
- Reset the Handset/Base Settings
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the BT4600 and is the answer not in the manual?
Questions and answers
BT 4600 bt button phone is there a way we can isolate the Ansaphone as my Mum says somehow it keeps cutting in on its own & Mum has to keep switching it off on the base? Other wise is there a big button BT phone without this facility with 3 phones?
How do I set up a name on my bt 4600 so there name shows on the screen when they call me.
How di I increase the ringing time before it diverts to the answer machine
To increase the ringing time before the BT4600 diverts to the answer machine:
1. Select Menu, and when Answer Phone is displayed, press OK.
2. Press the navigation button until Answer settings is displayed, then press OK.
3. Press the navigation buttons to choose between Answer & record or Answer only, and press OK.
4. When Answer delay is displayed, press OK.
5. Use the navigation buttons to select the desired number of rings (2-10 rings or Time saver) and press OK.
6. Saved will be displayed to confirm the change.
This answer is automatically generated
does the phone have a re-set to factory settings function please.
Yes, the BT4600 phone has a factory reset function. It allows you to reset the handset or base settings to their default values. This can be done through the menu by selecting "Settings," then "Reset," and confirming the reset for either the handset or base.
This answer is automatically generated
@geraldine
how too replace batteries
To replace the batteries in the BT4600 cordless phone, follow these steps:
1. Use the Correct Batteries: Only use NiMH rechargeable batteries with a voltage of 1.2V and a capacity of 750mAh.
2. Open the Battery Compartment: Remove the battery cover on the handset.
3. Remove the Old Batteries: Take out the existing batteries carefully.
4. Insert New Batteries: Place the new rechargeable batteries in the correct orientation.
5. Close the Battery Cover: Secure the battery cover back in place.
6. Charge the Handset: Place the handset on the base to charge the new batteries before use.
Using incorrect batteries may damage the phone and pose a risk of explosion.
This answer is automatically generated
Is there any way l can buy the booklet of lnstrutions as my phone does not have the capability to download. Bt 4600.Thank you .
how to answer the phone
HOW DO I GET THE SETUP WIZARD BACK ON MY NEWV BT4600 PHONE
The setup wizard starts automatically when you begin using your BT4600 phone. Follow the on-screen instructions to complete the setup. For detailed setup instructions, refer to the User Guide.
This answer is automatically generated
The ringer is not working on the second handset. Is there some thing I can do to check where the fault lies and repair it
To troubleshoot the ringer issue on the BT4600 second handset, follow these steps:
1. Check the Telephone Line Connection – Ensure the telephone line is properly connected.
2. Verify Do Not Disturb Mode – Do Not Disturb may be enabled, which stops the ringer. Disable it if necessary (see page 39).
3. Check Block Nuisance Calls Setting – This feature may be blocking calls, preventing the ringer from sounding (see page 32).
4. Confirm Base Ringer Settings – Ensure the base ringer is not set to off.
5. Test Another Socket or Line – The phone line or socket may be faulty. Try using a different socket or line.
6. Avoid Electrical Interference – Stay at least one metre away from other electrical equipment to prevent interference.
If the issue persists, contact BT support at 0800 145 6789.
This answer is automatically generated
how to remove the battery cover on BT 4600 phone