Related Manuals for Panasonic ARB-HT3G
Summary of Contents for Panasonic ARB-HT3G
- Page 1 900MHz Wireless Microphone Installation Guide Note: Please follow these instructions on how to install your 900MHz Wireless Microphone...
- Page 2 ARB-HT3G Wireless Mic Receiver Connection to VPU 1/2 ARB-HT3G Wireless Mic Receiver Connec on to VPU 1/2 Distribution Center DC Power (Red) #1 To J3 + Terminal Digital Wireless Mic Power GND (Black) #2 Receiver (RX) Receiver & Transmitter To J3 - Terminal Recording Trigger (Yellow) à...
- Page 3 ARB-HT3G Wireless Mic Receiver Connection to VPU 2/2 ARB-HT3G Wireless Mic Receiver Connec on to VPU 2/2 1. Besides power and GND lines, there are four trigger lines. See the page 7 and connect each line properly to the GPI inputs.
- Page 4 ARB-HT3G Wireless Mic Receiver ARB-HT3G Wireless Mic Receiver Trigger Configuration for Front-End Application – Trigger Configura on for Front-End Applica on...
- Page 5 ARB-HT3G Wireless Mic Receiver ARB-HT3G Wireless Mic Receiver ARB-HT3G Wireless Mic Receiver – GPO Configura on for WMIC Record Reset Feature – GPO Configura on for WMIC Record Reset Feature GPO Configuration for WMIC Record Reset Feature Note: Note: Note: 1) GPO status must be set “REC”...
- Page 6 ©2014 Panasonic Corporation of North America. All rights reserved. Arbitrator 360 HD Wireless Microphone Installation Guide_05/14...