Stopping The Engine - Toro 74902TE Operator's Manual

A
C
D
Figure 18
6. Turn the ignition key to the Start position
When the engines starts, release the key.
Important: Do not engage starter for more than 5
seconds at a time. If the engine fails to start allow
a 15 second cool-down period between attempts.
Failure to follow these instructions can burn out
the starter motor.
Note: Additional starting cycles may be required
when starting the engine for the first time after the fuel
system has been without fuel completely.
Figure 19
1. Off
2. Run
B
D
g027336
(Figure 16).
G008947
3. Start

Stopping the Engine

CAUTION
Children or bystanders may be injured if they
move or attempt to operate the machine while it is
unattended.
Always remove the ignition key and set the parking
brake when leaving the machine unattended, even
if just for a few minutes.
Let the engine idle at slow throttle (turtle) for 60 seconds
before turning the ignition switch off.
A
C
E
Important: Make sure that the fuel shut off valve is
closed before transporting or storing the machine, as
fuel leakage may occur. Set the parking brake before
transporting. Make sure to remove the key as the fuel
pump may run and cause the battery to lose charge.
21
B
D
g027337
Figure 20