Using The Side Discharge; Transporting Machines - Toro 74902TE Operator's Manual

With 48 turbo force side discharge mower
Hide thumbs Also See for 74902TE:
Table of Contents

Advertisement

Figure 36
1. Vertical to push the
machine
4. Rotate the release valve levers horizontally to run the
machine (Figure 36).

Using the Side Discharge

The mower has a hinged grass deflector that disperses
clippings to the side and down toward the turf.
DANGER
Without a grass deflector, discharge cover, or
complete grass catcher assembly mounted in
place, you and others are exposed to blade contact
and thrown debris. Contact with rotating mower
blade(s) and thrown debris will cause injury or
death.
• Never remove the grass deflector from the mower
because the grass deflector routes material down
toward the turf. If the grass deflector is ever
damaged, replace it immediately.
• Never put your hands or feet under the mower.
• Never try to clear the discharge area or mower
blades unless you move the power take off (blade
control switch (PTO) to the off position, rotate
the ignition key to off and remove the key.
• Make sure the grass deflector is in the down
position.

Transporting Machines

Use a heavy-duty trailer or truck to transport the machine.
Ensure that the trailer or truck has all necessary brakes,
lighting, and marking as required by law. Please carefully read
all the safety instructions. Knowing this information could
help you, your family, pets or bystanders avoid injury.
2. Horizontal to run the
machine
WARNING
Driving on the street or roadway without turn
signals, lights, reflective markings, or a slow
moving vehicle emblem is dangerous and can lead
to accidents causing personal injury.
Do not drive machine on a public street or roadway.
To transport the machine:
1. If using a trailer, connect it to the towing vehicle and
connect the safety chains.
2. If applicable, connect the trailer brakes.
3. Load the machine onto the trailer or truck.
4. Stop the engine, remove the key, set the brake, and
close the fuel valve.
5. Use the metal tie down loops on the machine to
securely fasten the machine to the trailer or truck with
straps, chains, cable, or ropes (Figure 37).
1. Traction unit tie down loops
28
Figure 37

Advertisement

Table of Contents
loading

This manual is also suitable for:

Z master professional 6000 seriesZ master 74902te

Table of Contents