Cut / Cash Drawer - BIXOLON SRP-350plusIII Driver Manual

5-5 Cut / Cash Drawer

1) Open the Printer Properties window for the corresponding OS.
2) In the General tab, click Preferences
.
3) Click the Cut / Cash Drawer.
Various functions including Open Cash Drawer, Internal Beep, Line Feeds and Paper-Cut
can be inserted at the beginning or end of the document from this tab.
Cut: Paper can be cut at the end of each page or each document.
Page/Job : No Cut / No Cut
Page/Job : No Cut / Partial Cut
Page/Job : Partial Cut / Partial Cut : Paper is cut at the end of each page.
Line feed: It is possible to set the number of line feeds between 0 and 99 for adding blank
lines at the end of printing.
Cash Drawer:
- To open a cash-drawer at the start time of the printing procedure, tick Open before
printing #1 or Open before printing #2 under Begin Job label.
- To open a cash-drawer at the start time of the printing procedure, tick Open before
printing #1 or Open before printing #2 under End Job label.
Internal Beep:
- To make a beep sound at the start time of the printing procedure, tick Internal Beep
under Begin Job label.
- To make a beep sound at the end time of the printing procedure, tick Internal Beep
under End Job label.
Rev. 1.02
: Paper is not cut after printing.
: Paper is cut at the end of each document (Job).
- 32 -
SRP-350plusIII