Technical Specifications Model Name: Flashtorch Lamp Output: 4100 Lumens with a High Efficiency Reflector Dimensions: 63mm x 48mm x 293mm ( Head x Barrel x Length) Weight: 610g Power Supply: 18650 Lithium-Ion Battery Pack Power Consumption: 16.8V@10A Battery Lifetime: 10 - 40 Minutes...
WWW.W I CK E DL A SE R S. C OM Flashtorch Diagram LED Switch Lamp Head Tailcap Button Tailcap Battery Compartment Power (DC) Input FLA SH TO RCH | 4...
WARNING: The Flashtorch’s lamp head may become extremely hot after a few minutes of use. Do not touch it while in use and allow enough distance from the lamp head for heat dissipation. U ser ’ s M an ual & Sa fety Gui de | 5...
LED switch will be unresponsive. The LED switch will be blinking to indicate it is in Lock Mode. To exit this mode, disconnect the charger and press the tail cap switch twice to turn it off then on again. Do not leave the Flashtorch in Lock Mode. Exit this mode whenever possible.
Lift the rubber flap that covers the Connect the power cord to the Allow the Flashtorch to charge for power (DC) input. Flashtorch and plug the charger to the three hours. wall socket. WARNING: Please turn off the flashlight before charging. Do not operate the flashlight while it is charging.
WWW.W I CK E DL A SE R S. C OM Bulb Replacement Holding the Flashtorch upright, twist the head counter clockwise to unscrew it. Using a piece of cloth or tissue, cover the light bulb and pull it off from the flashlight.
Battery Replacement Unscrew the tail cap and open the Disconnect the power cable and remove WARNING: DO NOT PULL OUT OR TWIST battery enclosure by pushing on the the battery. THE PLASTIC BATTERY ENCLOSURE. locking tab. Doing so will damage the flashlight. User ’s Ma nua l &...
Page 14
WWW.W I CK E DL A SE R S. C OM Battery Replacement Insert the new battery with the cable Reconnect the power cable and close the Make sure the locking tab is secure then facing the locking tab. battery enclosure. screw-on the tailcap cover.
Safety Instructions The Flashtorch is an extremely bright flashlight, do not aim or point it toward the eyes of yourself or people around you. When in operation, do not place any objects in close range or in front of the lamp head.
NOTICE: All products sold by Wicked Lasers may not be used to violate the privacy rights of others. In no way shall Wicked Lasers or its or any of its subsidiaries or affiliates be held responsible for inappropriate use of its products.
Manufacturer’s Warranty The Flashtorch comes with a standard 12 Month Manufacturer’s Warranty. Our warranty guarantees your Flashtorch to be free from defects in manufacture and workmanship. All defective products will be replaced or repaired subject to the full discretion of Wicked Lasers.
Page 18
Manufacturer’s Warranty This warranty does not include defects or damages attributable to misuse, normal surface weathering, or damages caused by accidents or fire or other casualty or force majeure or any other causes or occurrences beyond the manufacturer’s control. To claim your warranty, please send this form or email support@wickedlasers.com with the following information: Full Name: Address:...
Page 20
1-877-952-7377 Unit 1010, Miramar Tower, 132 Nathan Road, Tsim Sha Tsui Kowloon, Hong Kong www.wickedlasers.com | support@wickedlasers.com...
Need help?
Do you have a question about the FlashTorch and is the answer not in the manual?
Questions and answers