Network Settings - Samsung BD-H5900 User Manual

Network Settings

To begin setting up the network
connection for your player, follow these
steps:
1. In the Home menu, press the ▲▼◀▶
buttons to select Settings, and then
press the v button.
2. Press the ▲▼ buttons to select
Network, and then press the v
button.
3. Press the ▲▼ buttons to select
Network Settings, and then press the
v button.
4. Press the ▲▼ buttons to select
Network Type, and then press the v
button.
5. Press the ▲▼ buttons to select Wired
or Wireless, and then press the v
button.
6. Go to the next section.
Configuring Your Network
Connection
Before you begin, contact your ISP to find
out if your IP address is static or dynamic.
If it is dynamic, and you have a wired or
wireless network, we recommend using
the Automatic configuration procedures
described below.
If you are connecting to a wired network,
connect the player to your router
using a LAN cable before you start the
configuration procedure.
If you are connecting to a wireless
network, disconnect any wired network
connection before you begin.
To begin configuring your network
connection, follow these steps:
Wired Network
Wired - Automatic
Ğ
1. In the Home screen, select Settings,
and then press the v button.
2. Select Network, and then press the v
button.
3. Select Network Settings, and then
press the v button.
4. Select Wired in the Network Settings
screen, and then press the v button.
5. Select Connect button, and then press
the v button. The product detects
the wired connection, verifies the
network connection and then connects
to the network.
Wired - Manual
Ğ
If you have a static IP address or the
Automatic procedure does not work, you'll
need to set the Network Settings values
manually.
Follow Steps 1 and 2 in Wired - Automatic,
and then follow these steps:
1. Select Network Status. The player
searches for a network, and then
displays the connection failed message.
2. On the bottom of the screen, select
IP Settings, and then press the v
button.
The IP Settings screen appears.
3. Select the IP Setting field, and then
press the v button.
4. Select Enter manually in the IP Setting
field, and then press the v button.
5. Select a value to enter (IP Address,
for example), and then press the v
button.
Use the number keypad on your
remote control to enter the numbers
for the value. Use the ◀▶ buttons
on the remote control to move from
entry field to entry field within a value.
When done with one value, press the
v button.
6. Press the ▲ or ▼ button to move to
another value, and then enter the
numbers for that value following the
instructions in Step 5.
7. Repeat Steps 5 and 6 until you have
filled in all values.
✎
NOTES
You can get the Network values
■
from your Internet provider.
8. When finished entering all the values,
and then press the RETURN or EXIT
buttons. The player verifies the
network connection and then connects
to the network.
Wireless Network
You can setup a wireless network
connection in four ways:
- Wireless Automatic
- Wireless Manual
- WPS(PBC)
- WPS(PIN)
When you configure the wireless network
connection, any wireless network devices
currently connected through the player
or, if applicable, the player's current wired
connection, will be disconnected.
Wireless - Automatic
Ğ
1. In the Home screen, select Settings,
and then press the v button.
2. Select Network, and then press the v
button.
3. Select Network Settings, and then
press the v button.
4. Select Wireless in the Network Settings
screen, and then press the v button.
The player searches for and then
displays a list of the available networks.
Network Settings
Select your network type.
Network Type Wireless
Wireless network
You can connect your Blu-ray
Add Network
player to the internet. Please
select which wireless network
to use.
WPS(PBC) Search
m Move " Select ' Return
5. Select the desired network, and then
press the v button.
6. On the Security screen, enter your
network's Security Code or Pass
Phrase.
Enter numbers directly using the
number buttons on your remote
control. Enter letters by selecting a
letter with an arrow button, and then
pressing v button.
7. When done, select Done and then
press the v button. The player verifies
the network connection and then
connects to the network.
8. When verification is complete, select
OK, and then press the v button.
✎
NOTES
You should be able to find the
■
Security Code or Pass Phrase on one
of the set up screens you used to
set up your router or modem.
13