Assembly & Set-Up
Contents of Carton
•
Lawn Mower (1)
•
Lawn Mower Operator's Manual (1)
† If Equipped
NOTE: Please be aware that this Operator's Manual covers both
the low and high wheel models of this mower. While this manual
illustrates the high wheel model, the instructions and features
are equally applicable to the low wheel model as well, unless
otherwise noted.
Assembly
NOTE: This unit is shipped without gasoline or oil in the engine.
Fill up with gasoline and oil as instructed in the accompanying
engine manual BEFORE operating your mower.
Handle
1.
Remove any packing material which may be between
upper and lower handles.
a.
Remove wing nuts and carriage bolts from handle
as shown in Figure 3-1. Do not loosen or remove
adjacent hex head screws.
a
Figure 3-1
b.
While stabilizing mower so it doesn't move, pivot
upper handle up as shown in Figure 3-2. Do not
crimp cable while lifting the handle up.
•
Grass Catcher† (1)
•
Engine Operator's Manual (1)
a
2.
Remove the T-bolts from the handle brackets as shown in
Figure 3-3.
•
Bottle of Oil (1)
•
Side Discharge Chute† (1)
b
Figure 3-2
Figure 3-3
3
9