Advertisement
SAFETY INSTRUCTIONS
WARNING:
!
BE SURE to read and understand all instructions in this
manual before using this level. Failure to follow all instructions may result
in hazardous radiation exposure, electric shock, fire and/or serious personal
injury.
SAFETY PRECAUTIONS FOR LASERS
WARNING:
!
Use of controls, adjustments or performance of
procedures other than those specified in this manual may result in
hazardous radiation exposure.
WARNING:
!
The use of optical instruments such as, but not limited to,
telescopes or transits to view the laser beam will increase eye hazard.
This level has a built-in laser light. The laser is a Class llla and emits output power of
a maximum 2.5 mW and 635-665 nm wavelengths. These lasers do not normally
present an optical hazard. However, DO NOT stare at the beam as this can cause
flash blindness.
CAUTION
The following label is on your tool. It indicates where the
!
level emits the laser light. BE AWARE of the laser light location when using.
ALWAYS MAKE SURE that any bystanders in the vicinity of use are made
aware of the dangers of looking directly into the laser.
LASER RADIATION-
AVOID EXPOSURE-
DO NOT STARE INTO BEAM
Laser radiation is
635-665nm Output 2.5mW
Class IIIa Laser Product
emitted through
Complies with 21 CFR parts
1040.10 and 1040.11
this aperture
320.48293
08,2006
Made in China
WARNING:
!
LASER LIGHT. LASER RADIATION. Avoid Direct Eye
Exposure. DO NOT stare into beam. Only turn laser beam on when the level
is on the work surface. Class llIa laser.
1. DO NOT remove or deface any product labels. Removing product labels increases
the risk of exposure to laser radiation.
2. DO NOT stare directly at the laser beam or project the laser beam directly into
the eyes of others. Serious eye injury could result.
3. DO NOT place the Laser Trac™ level in a position that may cause anyone to stare
into the laser beam intentionally or unintentionally. Serious eye injury could result.
4. DO NOT use any magnifying optical tools such as, but not limited to, telescopes
or transits to view the laser beam. Serious eye injury could result.
4
ACCESSORIES
Tripod
There is a Craftsman Tripod 9-48278 that can be use with your 24-inch level.
It has a
1
/
-in. threaded screw that fits the
1
/
-in. threaded screw hole on the level.
4
4
Visit your local Sears store or other Craftsman outlets or shop sears.com/craftsman.
17
24-inch LEVEL
Advertisement
