A Division of Snow Joe
, LLC
®
IMPORTANT!
Safety Instructions
All Operators Must Read These
Instructions Before Use
The operator must read and understand all safety and warning
information, operating instructions, maintenance, and storage
instructions before operating this equipment. Failure to
properly operate and maintain the log splitter could result in
serious injury to the operator or bystanders.
m
DANGER!
This symbol indicates a hazardous situation,
which, if not followed, will result in serious injury or death.
m
WARNING!
This symbol indicates a hazardous
situation, which, if not avoided, could result in serious injury
or death.
m
CAUTION!
This symbol indicates a hazardous situation,
which, if not avoided, could result in minor or moderate injury.
General Safety Warnings!
Anyone who intends to operate this tool must read and
understand all the safety and other information contained in
this manual before first use. Save this manual and review it
frequently prior to using this tool and when instructing others
on the proper operating procedures.
1. Keep work area clean and well-lit – Set up the
equipment and use it only on a flat and level surface in an
outdoor, well-ventilated area.
2. Replacement parts – When servicing this unit, use only
identical replacement parts.
3. Keep children, bystanders, and pets away – All
spectators, including pets, should be kept a safe distance
away from the work area.
4. Dress properly – Do not wear loose clothing or jewelry as
such articles can become caught in moving parts. Wear
a protective covering to contain long hair. Wearing rubber
gloves and substantial non-slip footwear is recommended
when working outdoors.
5. Wear personal protective equipment – When using this
tool, wear safety glasses with side shields or goggles to
provide necessary eye protection. Wear ear defenders to
prevent hearing damage when necessary. Use a face or
dust mask if the work environment is dusty.
© 2015 by Snow Joe
, LLC
®
All rights reserved. Original instructions.
10-TON HYDRAULIC LOG SPLITTER
Model LJ10M
6. Store idle tool indoors – When not in use, the log splitter
should be stored indoors in a dry and high or locked-up
place out of the reach of children.
7. Maintain the log splitter with care – Keep the log splitter
clean for optimal performance and to reduce the risk of
injury. Follow the additional recommendations described
in the maintenance section of this manual.
8. Use the right tool – Do not use the tool for any job except
that for which it is intended.
9. Stay alert – Watch what you are doing. Use common
sense. Do not operate the log splitter when you are
tired or under the influence of drugs, alcohol, or other
medication.
Operation Warnings
• Do not at any time carry passengers, sit, or stand on the log
splitter.
• Do not allow children to play on, stand upon, or climb on
the log splitter.
• Always inspect the log splitter before using to ensure it is in
proper working order.
• Replace or repair damaged or worn parts immediately.
• Always use the splitter on a flat and level surface.
• Always check and tighten hardware and assembled parts
before operation.
• Only use the log splitter for its intended purpose: splitting
logs.
• Do not exceed the maximum permitted log length of 18 in.
(45.7 cm) or the maximum permitted log diameter of 8 in.
(20.3 cm).
• Always split wood in the direction of the grain. Do not split
wood against the grain.
• Do not exceed the equipment's maximum load capacity of
10 tons.
• Never leave the log splitter unattended while operating the
equipment.
• Keep area around the log splitter clear of debris to prevent
injury.
• Always clear away wood pieces from the work area before
splitting another log.
• Do not tow the log splitter with any motorized vehicles,
such as lawn and garden tractors or ATVs.
SAVE THESE INSTRUCTIONS
1
Form No. SJ-LJ10M-880E-M
OPERATOR'S MANUAL
Need help?
Do you have a question about the LJ10M and is the answer not in the manual?
Questions and answers
Where is the parts list?
I **** having trouble pulling out the oil plug and afraid it will snap. Suggestions?
To safely remove the oil plug on a Sun Joe LJ10M without breaking it, follow these steps:
1. Turn the Hand Wheel: Rotate the hand wheel counterclockwise as fast as possible. This will retract the piston rod into the hydraulic pump and push air out through the oil plug hole.
2. Loosen the Oil Plug Carefully: Use the appropriate tool to gently loosen the oil plug, avoiding excessive force that could damage the plug.
3. Check Oil Levels: Once removed, check the oil level and add more if necessary.
4. Replace the Oil Plug Securely: After maintenance, replace the oil plug completely and ensure it is properly tightened to prevent leaks.
Always handle the oil plug gently and avoid overtightening to prevent breakage.
This answer is automatically generated
Where can I get a replacement oil plug -- mine popped out and I can't find it. Won't work without the plug.
You can find a replacement oil plug for the Sun Joe LJ10M by contacting the Snow Joe® + Sun Joe® customer service center at 1-866-SNOWJOE (1-866-766-9563). When reordering parts, provide the model and serial numbers, which are located on the decal on the unit's housing.
This answer is automatically generated