Page 1
GPS 12H Owner’s Manual September 2015 Printed in Taiwan 190-01956-00_0A...
Page 2
All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the right to change or improve its products and to make changes in the content of this manual without obligation to notify any person or organization of such changes or improvements.
Getting Started Installing AA Batteries The handheld device operates using two AA batteries (not WARNING included). For best results, you should use NiMH or lithium See the Important Safety and Product Information guide in the batteries. product box for product warnings and other important Slide the battery cover down and remove the cover from the information.
Routes Record Method: Sets a track recording method. The Auto option records the tracks at a variable rate to create an A route is a sequence of waypoints or locations that leads you to optimum representation of your tracks. your final destination. Recording Interval: Sets a track log recording rate.
Select Setup > System > Interface. When navigating to a destination, points to your destination, regardless of the direction you are moving. Garmin Serial: Enables the device to use a Garmin proprietary ® format to exchange waypoint, route, and track data with a Begin navigating to a destination.
™ (www.garmin.com/express) provides easy computer, you must install batteries. The computer USB port access to these services for Garmin devices. may not provide enough power to operate the device. • Product registration Pull up the weather cap from the mini-USB port.
Reinstall the batteries. Restoring All Default Settings Open the Garmin drive or volume. You can reset all settings back to the factory default settings. If necessary, open a folder or volume. Select Setup > Reset > Reset All Settings > Yes.
Need help?
Do you have a question about the GPS 12H and is the answer not in the manual?
Questions and answers