Stand - Canon imagePROGRAF iPF680 User Manual

iPF680

Stand

Stand

When using an optional Stand, you can store and stack documents printed on rolls.
• Printer Stand ST-27
Accessory Pocket
a
Stores printer accessories.
b Output Stacker
Printed documents are ejected into the output tray.
Locking Caster
c
Lock to immobilize the caster.
Before moving the printer, always unlock all four casters. Moving the printer while casters are locked may
scratch the casters or the floor.
Adjustable Stopper
d
Pull out depending on the paper size when using the output stacker in the Extended position A.
For details on the extended position, see "Using the Output Stacker."
e Paper Guide
Guides printed documents into the output stacker.
Output stacker handle
f
This handle is grasped and supports the sliding output stacker when putting the output stacker into Exten-
ded position B and returning it to the regular position.
For details on the extended position, see "Using the Output Stacker."
Output stacker release lever
g
Pull this lever towards you to release Extended position B.
For details on the extended position, see "Using the Output Stacker."
Output Stacker Ejection Guides
h
This guide supports the paper that is output when using the output stacker in Extended position B.
•
The Stand that can be used with this printer is Printer Stand ST-27 and Printer Stand ST-26.
•
Note The Stand is normally offered as an optional accessory, but either one or the other of the Stand may be included as
a standard accessory in some sales regions and periods.
•
The output stacker of the Printer Stand ST-26 has a regular position and an Extended position A.
For details on the extended position, see "Using the Output Stacker."
•
The Stand is described in the illustration of Printer Stand ST-27. Note that the illustrations may look different from
the appearance of your printer in some cases.
User's Guide
P.363
➔
P.363
➔
P.363
➔
P.363
➔
Stand
439