Alpha One
Bravo One
Bravo Two
Bravo Three
11. Remove the pump from the oil fill/drain hole. Quickly install the sealing washer and oil
fill/drain screw. Tighten securely.
12. Reinstall the propeller. Refer to Propellers.
13. Recheck the oil level after the first use.
IMPORTANT: Oil level in the gear lube monitor will rise and fall during sterndrive operation.
Check the oil level only when the sterndrive is cool and the engine is shut down.
Power Trim Fluid
Checking
IMPORTANT: Check the oil level with the sterndrive unit in the full down/in position only.
1. Place the sterndrive unit in full down/in position.
2. Observe the oil level. Level must be between the "MIN" and "MAX" lines on the
reservoir.
a
3. Fill as necessary with the specified fluid.
Tube Ref No.
Filling
1. Remove the fill cap from the reservoir.
NOTE: Fill cap is vented.
2. Add lubricant to bring level to the within the "MIN" and "MAX" lines on the reservoir.
Tube Ref No.
3. Install the cap.
90-864195072 OCTOBER 2007
Model
Capacity
1892 mL (64 oz)
2736 mL (92‑1/2 oz)
3209 mL (108‑1/2 oz)
2972 mL (100‑1/2 oz)
a -
Reservoir
Description
Power Trim and Steering Fluid
114
Description
Power Trim and Steering Fluid
114
Fluid Type
High Performance Gear Lubricant
b
b -
"MIN" and "MAX" lines
Where Used
Power trim pump
Where Used
Power trim pump
Section 5 - Maintenance
7876
Part No.
92-858074K01
Part No.
92-858074K01
Page 69
Need help?
Do you have a question about the 350 MAG and is the answer not in the manual?
Questions and answers