Table of Contents
Advertisement
Troubleshooting
Troubleshooting
In the unlikely event that your trolley develops a fault, you can be confident that your Motocaddy has been designed with an
easy diagnosis system and incredibly simple parts to change.
Should your trolley develop a fault please follow the easy to use diagnosis diagrams (pages 28-29).
Whilst running through the diagnosis diagrams it is recommended that you place your trolley in the folded position and
remove the wheels to enable easy handling.
NB : The diagnostics lights are located on the underside of trolley on the left hand side near the back of the under tray. The
lights are numbered as described within the troubleshooting diagram.
1) In the event that your trolley will not complete 18 holes after a full charge:
If this is the first time that your trolley has failed to complete 18 holes then we would suggest that you re-charge your
battery as soon as possible and make sure that it has a full charge and the charger is functioning correctly. Once charged
please try using the battery for one more round in case it had not charged properly before its last outing. If your battery
again fails to complete 18 holes, please contact our technical support team.
Page 27
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the S1 DHC and is the answer not in the manual?
Questions and answers
I am unable to unfold my trolley, it’s the upper handle which is the problem, it’s stuck in that position unable both to fold it and unfold it
To fix a stuck upper handle on a Motocaddy S1 DHC trolley, follow these steps:
1. Pull the clip to release the locking system.
2. Unfold the upper part of the frame.
3. Pull the clip again to lock the upper frame in place.
Make sure the clip is fully released and not obstructed. If the handle remains stuck, check for debris or misalignment in the locking mechanism.
This answer is automatically generated