Table of Contents
Advertisement
ShenZhen GETECH CO.,LTD
www.geeetech.com
towards the endstop. After they hit the endstop they will move back for a short distance and then
stop the movement. The origin location should be in the right front corner of the printer platform. If
the moving direction is reversed, you can change the motor direction in firmware.
(please refer to
FAQ).
4.1.2 Heating Test
Click the heating button of the hot bed
and the extruder
. The slash will disappear and
you will see the temperature rising up.
12
Advertisement
Table of Contents
Need help?
Do you have a question about the prusaI3 pro C and is the answer not in the manual?
Questions and answers