Canon EOS 1300D Instruction Manual page 98

Responding to Error Messages
68: Cannot connect to wireless LAN terminal. Retry from
the beginning.
Did you hold down the access point's WPS (Wi-Fi Protected

Setup) button for the specified period of time?
Hold down the WPS button for the period of time instructed by the

access point's instruction manual.
Are you trying to establish a connection near the access point?

Try establishing the connection when both devices are within reach

of each other.
69: Multiple wireless LAN terminals have been found.
Cannot connect. Retry from the beginning.
Connection is in progress by other access points in

Pushbutton Connection mode (PBC mode) of Wi-Fi Protected
Setup (WPS).
Wait a while before trying to establish the connection, or try to

establish a connection in PIN code connection mode (PIN mode)
(p.45, 68).
91: Other error
A problem other than error number 11 to 69 occurred.

Turn off and on the camera's power.

121: Not enough free space on server
The target Web server does not have enough free space.

Delete unnecessary images on the Web service, check the free

space on the Web server, then try sending the data again.
122: Connect to a computer, and correct the settings for
the Web service with EOS software.
Web service setting operation may have failed.

 Connect the camera and computer using an interface cable and
reconfigure Web service settings using EOS Utility (p.63).
98