Driving The Tractor - Cub Cadet GT2000 Operator's Manual

Hide thumbs Also See for GT2000:
Table of Contents

Advertisement

To use the REVERSE CAUTION MODE :
NOTE: The operator MUST be seated in the tractor seat.
1.
Start the engine as previously instructed on the previous
page.
2.
Turn the key from the NORMAL MOWING (Green) position
to the REVERSE CAUTION MODE (Yellow) position of the
key switch module. See Fig. 5-1.
Indicator
R
Light
Stop
Position
Figure 5-1
3.
Press the REVERSE PUSH BUTTON at the top, right corner
of the key switch module. The red indicator light at the
top, left corner of the key switch module will be ON while
activated. See Fig. 5-1.
4.
Once activated (indicator light ON), the tractor can be
driven in reverse with the cutting blades (PTO) engaged.
5.
Always look down and behind before and while backing to
make sure no children are around. After resuming forward
motion, return key to the NORMAL MOWING position.
The REVERSE CAUTION MODE will remain activated until:
a.
The key is placed in either the NORMAL MOWING
position or STOP position or
b.
The operator leaves the seat.

Driving The Tractor

WARNING!
Avoid sudden starts, excessive speed
and sudden stops.
1.
Lightly press the brake pedal to release the parking brake .
Move the throttle lever into the FAST position.
2.
To travel FORWARD, slowly press the forward drive pedal
forward until the desired speed is achieved. See Fig. 5-2.
3.
To travel in REVERSE, check that the area behind is clear then
slowly depress the reverse drive pedal until the desired speed
is achieved. See Fig. 5-2.
CAUTION:
Do NOT attempt to change the
direction of travel when the tractor is in motion.
Always bring the tractor to a complete stop before
changing from forward to reverse or vice versa.
Reverse
Push Button
Reverse
Caution Mode
Position
Start
Position
Driving On Slopes
Refer to the SLOPE GAUGE on page 8 to help determine slopes
where you may operate the tractor safely.
Mow up and down slopes, NEVER across.
Exercise extreme caution when changing direction on
slopes.
Watch for holes, ruts, bumps, rocks, or other hidden
objects. Uneven terrain could overturn the machine. Tall
grass can hide obstacles.
Avoid turns when driving on a slope. If a turn must be
made, turn down the slope. Turning up a slope greatly
increases the chance of a roll over.
Avoid stopping when driving up a slope. If it is necessary
to stop while driving up a slope, start up smoothly and
carefully to reduce the possibility of flipping the tractor
over backward.
Engaging the Parking Brake
NOTE: The parking brake must be set if the operator leaves the
seat with the engine running or the engine will automatically
shut off.
To set the parking brake:
1.
Press the brake pedal completely down with your left foot
and hold it in that position.
2.
Lift the parking brake/cruise control lever upward and hold
it in that position.
Forward Drive Pedal
Reverse Drive Pedal
Figure 5-2
WARNING!
Do not leave the seat of the tractor
without first placing the PTO/Blade Engage lever in
the OFF position and engaging the parking brake. If
leaving the tractor unattended, also turn the engine
off and remove the ignition key.
WARNING!
Do not mow on inclines with a slope in
excess of 15 degrees (a rise of approximately 2-1⁄2
feet every 10 feet). The tractor could overturn and
cause serious injury.
s
ectiOn
5 — O
15
peratiOn

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gtx 2100

Table of Contents