Samsung Galaxy Core Prime User Manual page 262

Connect to a Wi-Fi Network via WPS
Wi-Fi Protected Setup (WPS) is a network security standard that allows you to easily secure a wireless
network connection between your phone and a router.
To connect using a WPS button:
1. From Wi-Fi settings, tap More options
2. Tap the WPS button on your router.
3. Follow the prompts to complete the connection.
To connect using a Personal Identification Number (PIN):
1. From Wi-Fi settings, tap More options
2. Enter the PIN displayed on your router.
3. Follow the prompts to complete the connection.
Advanced Wi-Fi Settings
The advanced Wi-Fi settings menu lets you set up and manage wireless access points.
● Enable Notification When Open Networks Are Available: From Wi-Fi settings, tap More
options > Advanced > Network notification.
The setting is available when Wi-Fi is turned on.

Tap Network notification to turn the option on or off.

● Set Timing for Pausing a Connection: From Wi-Fi settings, tap More options
Keep Wi-Fi on during sleep and then select a setting.
● Allow Background Scanning for Wi-Fi Networks (Even When Wi-Fi Is Turned Off): From Wi-
Fi settings, tap More options
off.
● Switch between Wi-Fi and Cellular Service to Maintain a Stable Internet Connection: From
Wi-Fi settings, tap More options
or off.
● Install Network Security Certificates: From Wi-Fi settings, tap More options
Install certificates and select a certificate.
● Check MAC Address: From Wi-Fi settings, tap More options
MAC Address appears below "MAC Address."

Settings
> WPS push button.
> WPS PIN entry.
> Advanced > Always allow scanning to turn the option on or
> Advanced > Smart network switch to turn the option on
> Advanced >
> Advanced >
> Advanced.
253