Date And Time; About Device - Samsung Galaxy S III User Manual

Date and Time

By default, the phone receives date and time information
from the wireless network. When you are outside network
coverage, you may want to set date and time information
manually using the Date & time settings.
1. From the More menu, touch Date and time.
2. Touch a setting to configure:
• Automatic date and time: When enabled, the phone takes
date and time updates from the wireless network (disables Set
date, Set time, and Select time zone).
• Set date: Enter the current date (only available when Automatic
date and time is disabled).
• Set time: Enter the current time (only available when Automatic
date and time is disabled).
• Automatic time zone: When enabled, the phone uses the
network-provided time zone.
• Select time zone: Choose your local time zone (only available
when Automatic date and time is disabled).
• Use 24-hour format: When enabled, uses 24-hour time
display.
• Select date format: Set the format for date displays.
190

About Device

This menu contains legal information, system tutorial
information, and other phone information such as the model
number, firmware version, baseband version, kernel version,
and software build number.
To access phone information:
1. From the More menu, touch About device.
2. The following information displays:
• Software update: allows you to update your phone software, if
available. For more information, refer to "System updates"
on page 192.
• Status: displays the Battery status, Battery level (percentage),
Network, Signal strength, Mobile network type, Service state,
Roaming, Mobile network state, My phone number, MIN
number, PRL version, MEID version, IMEI number, ICCID
number, IP address, Wi-Fi MAC address (if Wi-Fi is set to ON),
Bluetooth address (if Bluetooth is set to ON), Up time, and
Device status.