Error Messages; Troubleshooting; Maintenance Log; Periodic Maintenance - CAME BK-221E Installation Manual

ERROR MESSAGES

Error messages appear on the display
E 1 The gate travel calibration was interrupted by the activation of the STOP button.
E 2 Gate travel calibration incomplete.
E 3 Encoder is broken.
E 4 Services test error
E 7 Insufficient working time
E 8 Release hatch open
E 9 Closing obstruction.
E 10 Opening obstruction.
E 11 Maximum number of obstructions detected.
E 13 The NC contacts are open (e.g. limit switches).
E 14 Serial communication error.

TROUBLESHOOTING

PROBLEM POSSIBLE CAUSES
It neither opens nor • Power supply missing
closes • The gearmotor is stuck
• The transmitter's battery is run down
• The transmitter is broken
• The Stopbutton is either stuck or broken
• The opening/closing button or the key-switch selector
is stuck
The gate opens but • The photocells are dirty
does not close • Automatic closing is disabled

MAINTENANCE LOG

Periodic maintenance

☞ Before doing any maintenance, cut off the power supply, to prevent any hazardous situations caused by accidentally activating the operator.
Periodic maintenance log kept by users (every six months)
Date
.
Notes
FIXES
• Check whether the power is on
• Lock the gearmotor
• Replace the batteries
• Call for assistance
• Call for assistance
• Call for assistance
• Clean and check proper functioning of the photocells
• Check whether function F 19 is activated
Signature