Assembly Hints - Nokia n800 Service Manual

CMO Operations & Logistics
Training and Vendor Development
Multimedia Creation & Support
12.

ASSEMBLY HINTS

1. Take special care to the KEYMAT TOP during assembly of
the B-COVER, it must not shift from its place. First align the
connectors with the corresponding openings in the B-COVER,
then push in the CAMERA MODULE and assemble the parts
carefully.
3. Gently, align the A-COVER with the B-COVER avoiding
bending the hooks.
5. and carefully press it in to place.
Service Manual N800 RX-34
Page 19 (32)
CONFIDENTIAL
2. Set the torque driver to the torque of 27 Ncm and tighten the
Torx Plus size 6 screws in the order shown.
4. Move the shown side of the A-COVER downwards...
6. Always use new screws when assembling STANDING SUPPORT
PAINTED. Set the torque driver to the torque of 12 Ncm and
tighten the Torx Plus size 4 screws in the order shown.
Copyright © 2006-2007 NOKIA Corporation. All rights reserved.
Approved 2.0
MGR
14.Mrz.2007