WayteQ P-35 User Manual page 12

output voltage 5V~5.2V) to charge it. Connect the unit with the charger to
charge it.
If you connect the player with computer, when the battery icon displays as
full, it indicates that the charging is full. Otherwise, when the battery icon
displays as charging, it display is charging.
Using the Micro SD card
After this unit is connected with the computer, you will find two movable
disks. The first one is the built-in memory disk of this unit and the other is the
disk for the Micro SD card. If no card is inserted, the second disk can not be
opened. This unit supports the extension of the Micro SD card from 128MB to
8GB.
Inserting and Pulling out the Micro SD card
Inserting:
Put the Micro SD card face up (side with words) (with the direction of the
display screen as the face), and slightly insert the card into the socket of the
card, i.e. connecting the unit. Under this state, you can play the content in the
Micro SD card.
Pulling:
Slightly push the Micro SD, and it will bounce by a section, and then you
can take it out.
Caution:
Please perform inserting and pulling operation under power off state!
Otherwise, there will be data loss or damaged to the files of the unit! If no card
is inserted, the computer will be unable to perform read and write operation for
the disk notes of the later removable disk (Micro SD card).
Power adapter is a key component of the portable player, which play a
crucial role in keeping the portable player's normal work and protecting your
security when using the player, a long-term customer surveys and after-sales
12