Dss Keys; Memory Keys - Yealink SIP-T26P User Manual

User Guide for the SIP-T26P IP Phone
There are four types of DSS keys: Memory Keys, Line Keys, Programmable Keys and Ext
Keys. The details will be introduced in the following. The use of line keys and memory
keys are almost the same. The SIP-T26P IP phone supports 10 memory keys and 3 line
keys.
You can assign predefined functionalities to the memory keys located on the right of the
phone. Memory keys allow you to have quick access to features such as recall and
voice mail. The memory key LEDs will indicate status when the keys are assigned with
particular features, such as BLF. The default key type of each memory key is N/A, which
indicates that this memory key provides no functionality until configuration.
To configure a memory key via phone user interface:
1. Press Menu->Features->DSS Keys->Memory Keys.
2. Select the desired memory key, and then press the Enter soft key.
3. Select the desired key type from the Type field.
4. (Optional.) Select the desired key event from the Key Type field.
5. (Optional.) Select the desired account from the Account ID field.
6. (Optional.) Enter the corresponding value in the Value field.
7. (Optional.) Enter the corresponding value in the Extension field.
8. Press the Save soft key to accept the change or the Back soft key to cancel.
Memory key is configurable via web user interface at the path DSSKey->Memory Key.
Note
When the phone is idle, you can also long press the memory key to configure it directly
on the phone.
Common used memory key features are explained in the following subchapters in
detail:
Line

Speed Dial

Voice Mail

Directed Pickup

Group Pickup

DTMF

Prefix

Local Group

50