HIGH-VOLTAGE CIRCUIT. IF THE INTERNAL PARTS OF THE CAMERA ARE EXPOSED DUE TO DROPPING OR DAMAGE, REMOVE THE BATTERY IMMEDIATELY TO PREVENT FURTHER USAGE. IN CASE OF MALFUNCTION, CONSULT YOUR NEAREST OLYMPUS DEALER OR OLYMPUS SERVICE CENTER. Symbols used in this manual:...
NAMES OF PARTS — Camera Body Selftimer/remote control button Flash mode button Shutter release LCD panel button Zoom lever Viewfinder Strap eyelet Lens barrier Light sensor Remote control sensor Always try to keep this clean. Dirt and stains can result in pictures that are unclear and out-of-focus. Wipe off any dirt or stains with a soft cloth.
USING THE STRAP Attach the strap as shown. LOADING AND CHECKING THE BATTERY Use one 3 V lithium battery (CR2). 1. While pressing the bottom of the battery compartment cover in direction in direction Make sure the lens barrier is closed before opening the battery compartment cover.
LOADING THE FILM 1. Slide the back cover release upward to open the back cover. Do not touch the inside of the camera, especially the lens. 2. Insert the film cartridge until it clicks into position. ISO400 film is recommended. If you are going to use non-DX-coded film, use ISO100 film.
Working Distance Shoot your subject from a distance of 0.6 m (2.0 ft) to infinity. If the green lamp blinks, the shutter cannot be released. Although the shutter will release when a subject is extremely close to the camera, the subject will be out of focus. In some cases, the autofocus may be unable to lock onto a subject.
Auto Flash 1. Press the shutter release button to 2. Press the shutter release make sure the orange lamp lights. Flash working range (with color negative film) Wide angle (W) 0.6 to 3.5 m (2.0 to 11.5 ft) 0.6 to 4.9 m (2.0 to 15.7 ft) 0.6 to 7.0 m (2.0 to 23.0 ft) Note: When slide film is used, the working range at the telephoto side will be reduced by about 40%.
Infinity The camera automatically sets the working distance at infinity. The flash does not fire except in the Fill-In Flash mode. Closing the lens barrier restores the Auto Exposure mode. Night Scene Flash Use this mode to clearly shoot a subject in the foreground and a night scene in the background.
SELFTIMER/REMOTE CONTROL/ CAMERA SHAKE INDICATOR How to select the mode Open the lens barrier. Press the selftimer/remote control button ( The mode switches in the order shown below. The selected mode is displayed on the LCD panel. Mode display No display ———————...
RC-300C (Optional) If the selftimer/remote control indicator doesn’t blink even when you press the button, replace the battery with a new one (CR2025). How to replace the battery of the remote control (RC-300C) 1. Turn the screw on the bottom of the remote control counterclockwise to loosen.
PRINTING THE DATE/TIME (Quartzdate models only) After opening the lens barrier, select the date/time mode you want to print. Press the MODE button. As you press it, the mode will switch in the order shown below. Keep the mode you want to print displayed.
38 ~ 80 mm zoom lens. Film format: 35 mm standard DX-coded film (24 x 36 mm). Lens: Olympus lens, 38 ~ 80 mm, F5.3 ~ 10.4, 5 elements in 4 groups. Shutter: Programmed electronic shutter. Viewfinder:...
Need help?
Do you have a question about the Stylus 80 and is the answer not in the manual?
Questions and answers