Nokia N8-00 Service Manual page 28

31) Tighten the two TORX + size 6 screws to the
torque of 15 Ncm in the order shown.
33) Push the COMBO ANTENNA into place.
35) Hold the WINDOW ASSY as shown. Connect the
DISPLAY CONNECTOR by pressing down on it carefully
with the SS-93. Be careful not to damage the
connector or components nearby!
28
32) Tighten the TORX + size 6 screw to the torque of
10 Ncm.
34) Remove the display protective film and lower
down the other end of the DISPLAY. Align the
DISPLAY to the WINDOW ASSY according to the small
edge on the WINDOW ASSY. Press and slide fingers
along the sides of the DISPLAY to activate the
adhesive.
36) Connect the WINDOW ASSY CONNECTOR by
carefully pressing it down with the SS-93. Be careful
not to damage the connector or components nearby!
Conf idential | Copyright © 2011 Nokia | A ll rights reserved
Nokia N8-00
RM-596
Service Manual Level 1&2
Version 6.0