Samsung GT-S5200 Service Manual page 86

7
1) Put on the LCD Module on the UPPER.
2) Push the camera module, so lock the
hooks
. There is two locker.
①
1) Be careful not to be damaged and scratched.
2) Handle with care the F-PCB not to be torn or
damaged.
7
1) Screw 2 Points as marked.
. 1.4 * 3 (6001-001811)
. 1.25~ 1.35 Kgf·cm
2) Attach the screw cap both sides.
①
1) Be careful not to be damaged and scratched.
②
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
8
1) Put slide F-PCB into the front's hole.
1) Be careful not to be damaged and scratched.
3) Handle with care the F-PCB not to be torn or
damaged.
8
1) Screw 2 Points as marked.
. 1.4 * 2 SCREW (6001-002261)
. 1.25~ 1.35 Kgf·cm
①
1) Be careful not to be damaged and scratched.
11-5
Exploded View and Parts List
②