Remote Control; Replace Battery - Sanyo FWSB415E Owner's Manual

3.2 Remote Control

(6)
f
(4) d
(1)
(Standby-On)
a
Switch the SoundBar on or off.
(2)
b Source buttons
• AUX INPUT: Switch your audio
source to the AUX connection.
• LINE INPUT: Switch your audio
source to the Line in (3.5mm jack)
connection.
• OPTICAL IN: Switch your audio
source to the optical connection.
• Bluetooth INPUT: Switch
your audio source to the bluetooth
connection.
c MUTE (3)
Mute or restore volume.
(4)
d Sound setting buttons
Toggle switch the sound mode
presets.
e VOL +/-
(5)
Increase or decrease volume.
(6)
f PAIR
Activate the bluetooth pairing or
disconnect the currently bluetooth
connection.
a
(1)
(2)
b
(3)
c
(4)
d
e
(5)

3.2.1 Replace battery

1
Open the battery compartment.
2
Insert one CR2025 battery, with the
polarity (+/-) as indicated.
3
Close the battery compartment.
Warning
•
Danger of explosion if battery is incorrectly
replaced. Replace only with the same or
equivalent type.
•
The product/remote control may or may not
contain a coin/button type battery, which can
be swallowed. Keep the battery out of reach of
children at all times!
•
The battery contains perchlorate material, handle
it with care. For information see www.dtsc.
ca.gov/hazardouswaste/perchlorate.
EN 7