Installation Instructions - NEC NW891 Instruction Manual

4

INSTALLATION INSTRUCTIONS

Location of washer
Check location where washer will be installed. Make sure you have everything
necessary for correct installation.
Proper installation is your responsibility.
•Do not place or store your washer below 0 °C (32°F) to avoid any damage from freezing.
•Install the washer on the horizontal solid floor.
C
A
UP DOWN
Drain system
Never forget to install drain hose before operating your washer.
The packing box is opened, there are a drain hose, and a hose clamp in the washer.
Non-Pump Model
• Connect the drain hose to the drain outlet
at the back side of the washer,
i
NOTES
• The opening must not be obstructed by carpeting when the washing machine is
installed on a carpeted floor.
If the washer is installed on an unsuitable floor, it could
make considerable noise, vibrate and cause a malfunction.
If washer is not level, adjust the front leg(A) up or down for
horizontal setting.
•Earthed electrical outlet(B) is required with 20cm of
bottom back of washer cabinet.
B
•Hot and cold water faucets (C) must be within 1M of the
upper back of the washer cabinet and provide water
pressure 0.3kgf/cm
Drain hose
2 -8kgf/cm 2
Pump Model
• Connect the drain hose to the drain outlet
at the back side of the washing machine,
Drain hose
4
Drain Outlet