Memory Seats - GMC Sierra Denali 2017 Owner's Manual

54 Seats and Restraints

Memory Seats

Crew/Double Cab Shown, Other
Models Similar
If memory equipped, the SET, 1, 2,
and (Exit) buttons on the driver
door are used to manually store and
recall memory settings for the driver
seat, outside mirrors, and adjustable
pedals (if equipped).
Storing Memory Positions
To store positions to the 1 and 2
buttons:
1. The ignition must be in ON/
RUN or ACC/ACCESSORY.
2. Adjust the driver seat, outside
mirrors, and adjustable pedals
(if equipped) to the desired
driving positions.
3. Press and release SET. A beep
will sound.
4. Immediately press and hold 1
until two beeps sound.
5. Repeat Steps 1 4 for a second
driver using 2.
To store positions to the
button and easy exit features,
repeat Steps 1 4 above using
store your positions for getting out
of the vehicle.
Manually Recalling Memory
Positions
Press and hold 1, 2, or
manually recall the previously
stored memory positions. Releasing
1, 2, or before the stored
positions are reached stops the
recall.
Automatically Recalling Memory
Positions (Auto Recall)
If programmed on in the vehicle
personalization menu, the Auto
(Automatic) Memory Recall feature
automatically recalls the current
driver s previously stored 1 or 2
position when the ignition is
changed from OFF to ON/RUN or
ACC/ACCESSORY.
See Auto Memory Recall under
Comfort and Convenience in
(Exit)
Vehicle Personalization 0 155.
to
To stop recall movement, press one
of the memory, power mirror or
power seat controls; or press the
adjustable pedal control (if
equipped).
RKE transmitters are not labeled
(Exit) to
with a number. If your memory seat
position is stored to 1 or 2 but this
position is not automatically
recalling, then store your positions
to the other button or switch RKE
transmitters with the other driver.