Panasonic KX-NS1000 Getting Started page 29

3.
In PBX Setting:
4.
In LAN Setting, the IP addresses for the PBX, DNS server, and DSP cards can be assigned automatically
through a DHCP server or entered manually.
When using a DHCP server:
When not using a DHCP server:
*1
Valid IP address range: "1.0.0.0" to "223.255.255.255"
*2
Valid subnet mask address range: "0–255.0–255.0–255.0–255" (except "0.0.0.0" and "255.255.255.255")
a.
Specify a Site name if Master was selected for PBX
Type in step 2.
b.
Select a Time Zone from the drop-down list.
c.
Click the Local Time box and select the date and
time from the menu.
d.
Click Next.
a.
Select Obtain an IP address automatically.
b.
Select Obtain DNS server address automatically.
c.
Select Obtain DSP IP address automatically.
Notice
The boxes will turn grey and the IP address
information will be assigned automatically.
Write down the address information assigned to
the PBX for future reference.
d.
Click Next.
a.
Select Use the following IP address.
b.
Enter an IP address
Gateway . (The default gateway may not need to be
*1
specified depending on your network configuration.)
c.
Select Use the following DNS server address.
d.
Enter the preferred and alternative DNS IP
addresses .
*1
e.
Select Use the following DSP IP address.
f.
Enter up to 2 IP addresses
card.
g.
Click Next.
4.1.1 Easy Setup Wizard
, Subnet Mask , and Default
*1 *2
for each installed DSP
*1
Getting Started 29