Table of Contents
Related Manuals for Workzone 53633
Summary of Contents for Workzone 53633
-
Page 1: Air Brush
User Manual 53633 AIR BRUSH Product Info www.powertoolsupport.com Read all safety warnings and all instructions thoroughly before operating this product. Ensure you keep your manual in a safe place for future reference. IM ed11; 07/2016... - Page 2 QR codes take you where you want to go quicky and easily Whether you require product information, spare parts or accessories, details on warranties or aftersales service, or if you want to watch a product demonstration video, our QR codes will take you there in no time at all.
-
Page 3: Table Of Contents
Contents Pack contents / parts Description of symbols General safety warnings Safety Instructions for Air Brush Compressors Safety Instructions for Air Brush Guns Using an Extension Hose Parts List Getting Started – Air Compressor Setting the Outlet Pressure Preparing the Air Brush Gun for use Preparation - Mixing and Thinning paint Recommended Types of Paints to Use Preparing the Air brush gun... -
Page 4: Pack Contents / Parts
Air Brush Kit Pack contents / parts Congratulations on the purchase of your Workzone® Air Brush Kit. When you open your packaging, first remove all items and check there are no parts damaged or missing. If you find anything wrong, do not operate the product until the parts have been replaced or the fault has been rectified. -
Page 5: Description Of Symbols
Description of symbols The rating plate on your compressor may show symbols. These represent important information about the product or instructions on its use. Conforms to relevant standards for electrical safety and electromagnetic compatibility. Wear breathing protection. Wear eye protection. Read the instruction manual. -
Page 6: General Safety Warnings
d. D General safety warnings e. W WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result f. To in electric shock, fire and/or serious injury. The word power tool used in the following warnings and 3. - Page 7 d. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Replace damaged cords immediately. Damaged or entangled cords increase the risk of electric shock. e.
- Page 8 i) C General safety warnings 5. S a. H 4. Power tool use and care a. Do not force the power tools. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
-
Page 9: Safety Instructions For Air Brush Compressors
i) Children should be supervised to ensure that they do not play with the appliance. 5. Service a. Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. -
Page 10: Safety Instructions For Air Brush Guns
Caution: Danger of injury! • Never point the spray stream towards human beings or animals. • Do not make any alterations to this Compressor. Only use the adaptors supplied with this product. • Use this product only in accordance with operation instructions included in this manual. -
Page 11: Using An Extension Hose
• Always disconnect from air supply when refilling the paint pot. • After every use ensure you clean your airbrush thoroughly. NEVER use the airbrush outside when it is raining. AFTER SALES SUPPORT 1800 909 909 e-mail: help@powertoolsupport.com (toll free) MODEL: №. TG212 • 07/2016 • 53633... -
Page 12: Parts List
12. 20cc Glass paint jar 28. Pressure switch 13. 20cc Glass jar vent hole 29. Air outlet regulator 14. 5cc Metal paint cup 22 23 AFTER SALES SUPPORT e-mail: help@powertoolsupport.com 1800 909 909 MODEL: №. TG212 • 07/2016 • 53633 (toll free) - Page 13 Air Brush Kit AFTER SALES SUPPORT 1800 909 909 e-mail: help@powertoolsupport.com (toll free) MODEL: №. TG212 • 07/2016 • 53633...
-
Page 14: Getting Started - Air Compressor
The pressure gauge is an indication of the outlet pressure, and should be read with air flowing through the air brush to indicate a true reading (Fig F). AFTER SALES SUPPORT e-mail: help@powertoolsupport.com 1800 909 909 MODEL: №. TG212 • 07/2016 • 53633 (toll free) -
Page 15: Setting The Outlet Pressure
3. Depress the trigger (23) on the air brush INCREASE DECREASE gun (15), but do NOT pull backward to engage the paint discharge (Fig G). LOCK AFTER SALES SUPPORT 1800 909 909 e-mail: help@powertoolsupport.com (toll free) MODEL: №. TG212 • 07/2016 • 53633... -
Page 16: Preparing The Air Brush Gun For Use
These paints can be purchased at hobby stores or online. AFTER SALES SUPPORT e-mail: help@powertoolsupport.com 1800 909 909 MODEL: №. TG212 • 07/2016 • 53633 (toll free) -
Page 17: Preparing The Air Brush Gun
NOTE: The 5cc metal paint cup (14) has no top so care must be taken not to spill the paint from the metal cup both during use and also filling. AFTER SALES SUPPORT 1800 909 909 e-mail: help@powertoolsupport.com (toll free) MODEL: №. TG212 • 07/2016 • 53633... -
Page 18: Operating The Air Brush Gun
NOTE: The size of the spray pattern is in accordance with the distance between the work surface and the nozzle of the air brush gun. AFTER SALES SUPPORT e-mail: help@powertoolsupport.com 1800 909 909 MODEL: №. TG212 • 07/2016 • 53633 (toll free) -
Page 19: Paint Flow Adjustment Screw
(23) backward, and then can be brought back to the rest for the low level consistent paint flow (Fig S). AFTER SALES SUPPORT 1800 909 909 e-mail: help@powertoolsupport.com (toll free) MODEL: №. TG212 • 07/2016 • 53633... -
Page 20: Tips For Operation
(23). This will create a finer line. AFTER SALES SUPPORT e-mail: help@powertoolsupport.com 1800 909 909 MODEL: №. TG212 • 07/2016 • 53633 (toll free) -
Page 21: Cleaning The Air Brush Gun
NOTE: Using a cleaning solvent OR water is dependent upon the type of paint you are using. Refer to the chart above. AFTER SALES SUPPORT 1800 909 909 e-mail: help@powertoolsupport.com (toll free) MODEL: №. TG212 • 07/2016 • 53633... -
Page 22: Cleaning / Replacing The Air Intake Filter
(Fig X). 2. After removing the cover, the small air filter will be exposed (Fig Y). Remove the air filter (Fig Z). AFTER SALES SUPPORT e-mail: help@powertoolsupport.com 1800 909 909 MODEL: №. TG212 • 07/2016 • 53633 (toll free) - Page 23 WARNING: DO NOT operate the compressor without a filter in place. NOTE: Replacement air filters are available for purchase by calling us on 1800 909 909 or emailing help@powertoolsupport.com AFTER SALES SUPPORT 1800 909 909 e-mail: help@powertoolsupport.com (toll free) MODEL: №. TG212 • 07/2016 • 53633...
-
Page 24: Draining The Water Trap
4. When you release the drain release valve (9), the valve will automatically close. 5. Ensure to clean up any excess water discharged from the drain release valve (9). AFTER SALES SUPPORT e-mail: help@powertoolsupport.com 1800 909 909 MODEL: №. TG212 • 07/2016 • 53633 (toll free) -
Page 25: Cleaning The Compressor
Follow instructions for lubricating and changing accessories. Inspect cords and air hoses periodically and, if damaged, have them repaired by an authorised technician/ Service Agent. AFTER SALES SUPPORT 1800 909 909 e-mail: help@powertoolsupport.com (toll free) MODEL: №. TG212 • 07/2016 • 53633... -
Page 26: Storage
Workzone ® Air Brush Kit. Take special care to heed the Cautions and Warnings. Your Workzone ® Air Brush Kit has many features that will make your job faster and easier. Safety, performance, and dependability have been given top priority in the development of this Air Brush Kit , making it easy to maintain and operate. -
Page 27: What Your 3 Year Warranty Means
Jar (53633-GJ) (53633-MC) Hose (53633-AH) 5. Air Brush Gun with 0.2mm nozzle (53633-ABG2) 6. Air Brush Gun with 0.3mm nozzle (53633-ABG3) If you have any queries regarding these accessories, please call us on our Customer Support Line - 1800 909 909. -
Page 28: Troubleshooting
Loose or damaged bearings. Plug compressor into alternate electical power source. For all other issues, please contact Customer Service on 1800 909 909 or email help@powertoolsupport.com AFTER SALES SUPPORT e-mail: help@powertoolsupport.com 1800 909 909 MODEL: №. TG212 • 07/2016 • 53633 (toll free) -
Page 29: Specifications
This product complies with: EMC: EN 55014-1: 2006 + A1:2009+A2:2011 EN 55014-2 :1997/A1:2001/A2:2008 EN 61000-3-2: 2014 EN 61000-3-3 :2013 Safety: EN 1012-1:2010; IEC 60335-1:2010/A1:2013 AS/NZS 60335.1:2011 AFTER SALES SUPPORT 1800 909 909 e-mail: help@powertoolsupport.com (toll free) MODEL: №. TG212 • 07/2016 • 53633... - Page 30 Customer Service Hotline. Made in China Workzone® is a registered trademark of ALDI Stores DISTRIBUTED BY: ALDI STORES...
Need help?
Do you have a question about the 53633 and is the answer not in the manual?
Questions and answers