______ Index Package Contents Determine Signal Strength Find the dBm Reading on Your Phone STEP 1: Measure Signal Strength: Inside Antenna STEP 2: Measure Signal Strength: Outside Antenna STEP 3: Connect the System STEP 4: Test System: Lights Mount Outside Antenna (Options A, B & C) STEP 5: Last Steps STEP 6:...
______ Package Contents Home Inside Outside (2) Cables Antenna Antenna Power Window Cable Roof/Pole Supply Entry Cable Connector Mount Bracket Window Wall Mount Mount Bracket Bracket HOME 4G CELL PHONE SIGNAL BOOSTER...
2 times the power and signal amplification 4 times the power and signal amplification 10dB 10 times the power and signal amplification 12dB 16 times the power and signal amplification 20dB 100 times the power and signal amplification CELL PHONE SIGNAL BOOSTER HOME 4G...
Any signal readings you take are valid for that phone’s carrier. To get readings from other carriers, you’ll need phones from each carrier. • When system is set-up, you can easily revert back to the “bar display” by restarting your phone. support.weboost.com 866.294.1660 NEED HELP? HOME 4G CELL PHONE SIGNAL BOOSTER...
Inside Antenna away from the Booster. • Keep the Booster away from direct sunlight, heat (<150°F), moisture and 6” away from oth- er objects (for ventilation). Ensure the Booster is near an outlet. CELL PHONE SIGNAL BOOSTER HOME 4G...
To maximize coverage area, if possible place the Outside Antenna directly above the Inside Antenna. • If the Outside Antenna is outside the building, use the flat Window Entry Cable to connect both rolls of cable. You can use this option during set-up and/or permanently. HOME 4G CELL PHONE SIGNAL BOOSTER...
Page 8
Step Number (minutes) Outside Roof/Pole Mount Best 40-90 Outside Wall Mount Better 20-40 Inside Window Mount 5-10 The Outside Antenna must be at least 20 feet away (horizontal or vertical) from the Inside Antenna. CELL PHONE SIGNAL BOOSTER HOME 4G...
See 7.5. You can use this option during set-up and/or permanently if you don’t want to drill holes through your wall. Power up the Booster. To protect Booster from power surges, connect to a power strip. See 7.6. HOME 4G CELL PHONE SIGNAL BOOSTER...
4. BEST: Increase the distance (horizontally or vertically) between the Outside and Inside antenna. Add cable if needed. Un-plug and re- plug in power supply. CELL PHONE SIGNAL BOOSTER HOME 4G...
Page 11
Change the method of mounting the Outside Antenna. Un-plug and re-plug power supply. After each step, un-plug and re-plug the power supply so the booster can update the signal reading. support.weboost.com 866.294.1660 NEED HELP? HOME 4G CELL PHONE SIGNAL BOOSTER...
Page 12
Watch out for power lines. See 10.1. 10.1 From Outside Antenna, remove lid, bracket and blue protective film (optional). See 10.2. 10.2 Attach the “L” shaped mounting bracket to the Outside Antenna. See 10.3. 10.3 CELL PHONE SIGNAL BOOSTER HOME 4G...
Page 13
Wait 15-60 seconds for reading to register. See 11.2. 11.2 Tighten nuts once you confirm booster has green lights and indoor signal strength has improved. See 11.3. 11.3 HOME 4G CELL PHONE SIGNAL BOOSTER...
Page 14
Position bracket on wall and use a pencil to mark the holes. See 12.2. Drill holes using 3/16 inch bit. Use anchors, washers and screws to attach Wall Bracket. 12.2 Slip Outside Antenna onto the Wall Mount Bracket to secure. See 12.3. 12.3 CELL PHONE SIGNAL BOOSTER HOME 4G...
Page 15
The skinny side of the Outside Antenna must face outside, toward the cell tower. If the skinny side of the Outside Antenna faces inside, towards the Booster, the system will not work. See 13.3. 13.3 HOME 4G CELL PHONE SIGNAL BOOSTER...
• To protect your system , you will want to purchase/install a lightening surge protector (#859992). This is especially important if the Outside Antenna is mounted outside. To purchase, call 866-294-1660 or visit weboost.com • After installing your system, check the lights after 24 hours to ensure no changes.
______ Specifications Home 4G ™ Product Number 470001 Model Number 460020 FCC ID PWO460020 4726A-460020 Connectors SMA-Female on the Inside Antenna / F-Female on the Outside Antenna Antenna Impedance 75 Ohms / 50 Ohms Frequency 698-716 MHz, 746-787 MHz, 824-894 MHz, 1850-1995 MHz, 1710-1755/2110-2155 MHz...
Page 18
______ (SPECIFICATIONS cont.) Home 4G™ Model Number 470001 FCC ID PWO460001 4726A-460001 Connectors SMA-Female on the Inside Antenna / F-Female on the Outside Antenna Antenna Impedance 75 Ohms / 50 Ohms Frequency 704-746 MHz, 746-787 MHz, 824-894 MHz, 1850-1995 MHz, 1710-1755/2110-2155 MHz...
This device complies with Part 15 of FCC rules. Operation is subject to two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by weBoost could void the authority to operate this equipment.
______ Warranty 2 YEAR WARRANTY weBoost Signal Boosters are warranted for two (2) years against defects in workmanship and/or materials. Warranty cases may be resolved by returning the product directly to the reseller with a dated proof of purchase. Signal Boosters may also be returned directly to the manufacturer at the consumer’s expense, with a dated proof of purchase and a Returned Material...
______ Antenna Kit Options The following accessories are certified by the FCC to be used with the Home 4G Booster. INSIDE ANTENNA EXPANSION KIT • 50 Ohm Wide Band Directional • 60’ RG6 Cable • 25’ RG58 Cable • N-Male to F-Female adapter...
Page 22
______ Notes CELL PHONE SIGNAL BOOSTER HOME 4G...
Page 23
______ Notes HOME 4G CELL PHONE SIGNAL BOOSTER...
Need help?
Do you have a question about the Home 4G and is the answer not in the manual?
Questions and answers