Function Description; Selecting A Menu Language - Samsung 3 SERIES User Manual

Setting the On/Off Timer
1. Press the MENU button to display the menu.
Press the. or"f button to select "Setup", then press the ENTER
G'
button.
Press the. or "f button to select "Time", then press the ENTER
G'
button.
2. Three different On/Off Timer Settings can be made. Press the. or "f button to
select 'Timer 1", "Timer 2" or "Timer 3", then press the ENTER
G'
button.
TV
IJI
Picture
6.
Sound
"'Channel
===~-=
11 1/2008 12: 00
am
Clock
~
Sleep Timer :
Off ...
~
Timer 2 : Inactivated .-
Timer
3 :
Inactivated ...
3. Press the. or
~
button to select the desired item below.
Press the. or "f button to adjust the setting.
• On Time: Set the Hour, Minute, am/pm, and Activation/Inactivation.
(To activate timer with the setting you've chosen, seno
"Activate".)
• Off Time: Set the Hour, Minute, am/pm, and Activation/Inactivation.
(To activate timer with the setting you've chosen, set to
"Activate".) .
• Volume: Set the required volume level,
• Channel: Select the desired channel,
• Repeat: Select "Once", "Everyday", "Mon-Fri", "Man-Sat", "Sat-Sun",or
"Manual".
»
When "Manual" is selected, press the
~
button to select the desired
day of the week. Press the ENTER
C3'
button over the desired day
and the
V
mark will appear.
Press the EXIT button to exit.
» You can set the hour, minute and channel by pressing the number buttons on
the remote control.
»
Auto Power Off
When you set the timer On, the television will eventually turn off, if no controls
are operated for 3 hours after the TV was turned on by the timer. This function
is only available in timer On mode and prevents overheating, which may occur
if a TV is on for too long time.
Function Description
tlIi.
Input
~ Move
l3'Enter
':>Retum
I
. '
1~electing a Menu Language
Press the MENU button to display the menu.
Press the. or "f button to select "Setup", then press the ENTER
G'
button.
Press the. or "f button to select "Language", then press the ENTER
G'
button.
2. Press the. or "f button to select "English", "Espanol" or "Franyais".
Press the ENTER
G'
button.
Press the EXIT button to exit.