VARIABLE-SPEED SELF-PROPEL SYSTEM (only for
LM2100-SP)
LM2100-SP mower is equipped with variable-speed self-propel
capability. This system is independent of the blade On-Off switch;
it is not dependent on blade rotation. For example, when you
have completed cutting your lawn, you can use the self propel
to propel the mower back to your storage location without blade
rotation. Or you may choose to operate the mower as a non-self-
propelled mower to maximize battery run time.
To operate the self-propel system without blade rotation, pull the
self-propel trigger to the handle.
To turn the self propel off, release the self-propel trigger (Fig. 17).
The system has variable speed. To increase the speed, move the
self-propel-speed-control lever forwards. To decrease the speed,
move the self propel speed control lever backwards.
To operate with the blade rotating for cutting:
1. Depress the safety button.
2. With the safety button depressed, pull the bail switch upward to the handle and release the safety button
3. Hold the bail switch against the handle with your left
hand. Pull the self-propel trigger to the handle with your right hand.
4. With your right hand, hold both the bail switch and the self-propel trigger against the handle and use your left hand
to adjust the self-propel speed-control lever to choose the desired speed.
NOTICE: When you turn off the self propel, for example, at the end of a row, it may become temporarily locked if you pull
backwards on the mower. Simply push ahead slightly and then move the mower as required.
During cutting, at times it may be easier to mow around an object, with the self propel turned off.
WARNING: To reduce the risk of injury, never attempt to override the operation of the switch or self propel system.
Use the self propel for its intended purpose only.
20
56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2100SP & LM2100
17
Self-Propel
Trigger
Self-Propel
Speed-Control Lever
Need help?
Do you have a question about the LM2100SP and is the answer not in the manual?
Questions and answers
Is there a video to replace trailing shield for LM2100SP
@Veda Gonzales
Even if the machine cools down and still won't start, and indicating that it needs to cool down after trying to start after an hour or so ,what is the other step?
I need the electrical wiring diagram with parts numbers for the model LM2100SP