Marcy GS 99 Manual
  1. Manuals
  2. Brands
  3. Marcy Manuals
  4. Home Gym
  5. GS 99
  6. Manual

Marcy GS 99 Manual

Corner gym
Hide thumbs

Advertisement

Table of Contents

NOTE:
Please read all instructions
carefully before using this
product
Table of Contents
Safety Notice
Resistance Chart
Warranty
Model
GS 99
Retain This
Manual for
Reference
Jan-14-05
OWNER'S
MANUAL
IBL
Marcy Platinum
Corner Gym
GS 99
Escalade International Limited
Pleasant Road, Penllegaer, Swansea. SA4 9GE
Tel: 00 44 1792 222 550 Fax 00 44 1792 895 781
www.escaladesports.co.uk
info@escaladesports.co.uk

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GS 99 and is the answer not in the manual?

Questions and answers

Related Manuals for Marcy GS 99

Summary of Contents for Marcy GS 99

  • Page 1 NOTE: Please read all instructions carefully before using this product Marcy Platinum Table of Contents Corner Gym Safety Notice GS 99 Hardware Pack Assembly Instruction Parts List Resistance Chart Warranty Ordering Parts Model GS 99 Retain This Manual for Reference...
  • Page 2 CARE AND MAINTENANCE………………………………………………………. 28 BEFORE YOU BEGIN Thank you for selecting the MARCY PLATINUM CORNER GYM by IMPEX FITNESS PRODUCTS. For your safety and benefit, read this manual carefully before using the machine. As the distributor, we are committed to provide you complete customer satisfaction.

  • Page 3: Important Safety Precautions

    PHYSICIAN. THIS IS ESPECIALLY IMPORTANT FOR INDIVIDUALS OVER THE AGE OF 35 OR PERSONS WITH PRE-EXISTING HEALTH PROBLEMS. READ ALL INSTRUCTIONS BEFORE USING ANY FITNESS EQUIPMENT. MARCY ASSUMES NO RESPONSIBILITY FOR PERSONAL INJURY OR PROPERTY DAMAGE SUSTAINED BY OR THROUGH THE USE OF THIS PRODUCT.
  • Page 4 HARDWARE PACK...
  • Page 5 HARDWARE PACK...
  • Page 6 HARDWARE PACK...
  • Page 7 ASSEMBLY INSTRUCTION Tools Required Assembling the Machine: Two Adjustable Wrenches and Allen Wrenches NOTE: It is strongly recommended two or people assembling this machine to avoid possible injury. STEP 1 (See Diagram 1) A.) Place the Right Base Frame (#1) on a flat surface. Make sure there is enough space around to assemble the machine.
  • Page 8 STEP 2 (See Diagram 2) A.) Attach the Rear Vertical Frame (#4) to the Right Base Frame (#1). Attach the Left Base Frame (#2) to the Rear Vertical Frame. Align the holes and secure them with two M10 x 2 ¾”...
  • Page 9 STEP 3 (See Diagram 3) A.) Attach the Right Vertical Beam (#3) to the Right Base Frame (#1). Secure it with two M10 x 2 ½” Carriage Bolts (#85), ∅¾” Washers (#99), and M10 Aircraft Nuts (#96). DO not tighten the Nuts and Bolts yet. B.) Attach the Right Seat Support (#7) to the Right Vertical Beam (#3).
  • Page 10 STEP 4 (See Diagram 4) A.) Slide fourteen Weight Plates (#44) onto the rear set of Guide Rods (#9). Make sure the groves on the Plates all face toward the back of the machine. Insert a Selector Rod (#29) into the centre holes. Slide a Selector Stem (#45) onto the two Guide Rods. B.) Repeat Procedure A above to install the other fourteen Weight Plates onto the other two Guide Rods.
  • Page 11 DIAGRAM 4...
  • Page 12 STEP 5 (See Diagram 5) A.) Attach the Left Seat Support (#8) to the Left Vertical Beam (#5). Secure it with two M10 x 2 ½” Carriage Bolts (#85), one 4 3/8” x 1 ¾” Bracket (#73), two Ø ¾” Washers (#99), and two M10 Aircraft Nuts (#96).
  • Page 13 STEP 6 (See Diagram 6) A.) Attach the Front Press Base (#10) to the Right Base Frame (#1). Secure it with one M10 x 9 ¼” Front Press Axle (#49), two Ø ¾” Washers (#99), and two M10 Aircraft Nuts (#96). B.) Attach two Front Press Frames (#13) onto the bracket on the Front Press Base.
  • Page 14 STEP 7 (See Diagram 7) A.) Attach the Butterfly Support Frame (#11) to the front of Right Vertical Frame (#3). Attach the Butterfly Pulley Support (#12) to the back of Right Vertical Frame. Align the holes and secure them with two M10 x 2 ½” Carriage Bolts (#85), Ø ¾” Washers (#99), and M10 Aircraft Nuts (#96).
  • Page 15 STEP 8 (See Diagram 8) A.) Attach the Vertical Press Frame (#20) to the Rear Vertical Frame (#4). Secure it with one M10 x 4 7/8” Vertical Press Axle (#48), two Ø ¾” Washers (#99), and two M10 x 5/8” Allen Bolts (#80).
  • Page 16 CABLE LOOP DIAGRAM...
  • Page 17 STEP 9 (See Cable Loop Diagram & Diagram 9) A.) Attach the 108” Upper Cable (#37) to the front opening on the Upper Frame (#6). Attach a Pulley (#56) to the opening. Secure it with one M10 x 2 3/8” Allen Bolt (#83), two Pulley Bushings (#55), and one M10 Aircraft Nut (#96).
  • Page 18 STEP 10 (See Cable Loop Diagram & Diagram 10) A.) Clip one end of the 106” Butterfly Cable (#38) to the slot on the Left Butterfly Adjustment Frame. Draw the Cable through the slot then to the open left Swivel Pulley Bracket (#23). B.) Attach a Pulley (#56) to the bracket.
  • Page 19 STEP 11 (See Cable Loop Diagram & Diagram 11) A.) Attach the 239” Front Press Cable (#36) to the lower opening on the Leg Developer (#19). Attach a Pulley (#56) to the opening. Secure it with one M10 x 2 3/8” Allen Bolt (#83), two Pulley Bushings (#55), and one M10 Aircraft Nut (#96).
  • Page 20 DIAGRAM 11...
  • Page 21 STEP 12 (See Diagram 12) A.) Attach end of the 357” Leg Press Cable (#39) to the bracket on the Left Seat Support (#8). Secure the Cable to the bracket with one M10 x 1” Allen Bolt (#81), two Ø ¾” Washers (#99), and one M10 Aircraft Nut (#96).
  • Page 22 DIAGRAM 12...
  • Page 23 STEP 13 (See Diagram 13) A.) Place a Seat Pad (#32) onto the Seat Incline Adjustment (#16). Secure it with two M8 x 1 5/8” Allen Bolts (#92) and Ø 5/8” Washers (#98). B.) Insert the Seat Incline Adjustment into the opening on the Left Seat Support. Secure it with a M18 Lock Knob (#61) at desired position.
  • Page 24 STEP 14 (See Diagram 14) A.) Place a Seat Pad (#32) onto the Right Seat Support (#7). Secure it with two M8 x 2 3/8” Allen Bolts (#91) and ∅ 5/8” Washers (#98). B.) Attach a Backrest Board (#33) to the Right Vertical Beam (#3). Secure it with two M8 x 2 3/8” Allen Bolts (#91) and ∅...
  • Page 25 STEP 15 (See Diagram 15) A.) Securely tighten all the nuts and bolts previously installed. B.) To maximize the performance of the gym, it is recommended to use light lubricant such as WD-40 on the two chromed rods which the weight plates slide up and down to minimum frictions.

  • Page 26: Parts List

    PARTS LIST KEY NO. DESCRIPTION Q’ty Right Base Frame 1 5/8” Rubber Bumper Left Base Frame Pulley Bushing Right Vertical Beam Pulley Rear Vertical Frame Small Pulley Left Vertical Beam T-shaped Pull Pin Set Upper Frame 2” Sleeve Right Seat Support 1 ¾”...
  • Page 28 GS 99 WEIGHT RESISTANCE CHART WEIGHT PLATE Station Low Pulley Lat Pull Butterfly Leg Press 100 120 140 160 180 Front Press 110 125 Vertical Press WEIGHT PLATE Station Low Pulley 115 125 135 145 155 165 Lat Pull 105 115 125 135 145...

  • Page 29: Limited Warranty

    LIMITED WARRANTY Escalade warrants this product to be free from defects in workmanship and material, under normal use and service conditions, for a period of two years on the frame and one year on all other parts and components from the date of purchase.
  • Page 30 CARE AND MAINTENANCE Inspect and tighten all parts before using the gym. The gym can be cleaned using a damp cloth and mild non-abrasive detergent. DO NOT use solvents. Examine the gym regularly for signs of damage or wear. Pay particular attention to the bushings on movable parts.

Table of Contents

Save PDF