Power Supply; Using The Car Adapter - Philips DCP750 User Manual

Power supply

Using the AC / DC adaptor
Connect the supplied adapter to the set
and the main power supply (as shown).
✔
TIP
To avoid damage to the player, switch off before plugging or unplugging the
AC adaptor.

Using the car adapter

Connect the supplied car adapter to the set and the
car cigarette lighter outlet.
✔
TIP
• To avoid damage to the player, switch off before plugging or unplugging
the car adaptor.
• When connecting with car power (cigarette lighter) adaptor, be sure the
input voltage of the adaptor is identical with car voltage.
• Make sure the temperature is below 35 o C when the DVD player is
connected to DC 16.0V in a car.
Powering your remote control
Lift the handle marked / EJECT to take out the
1
remote control. Open the battery compartment.
Remove the protective plastic tab (first time users
only).
2 Insert 1 x lithium 3V battery, type CR2025, then close the compartment.
CAUTION
- Batteries contain chemical substances, so they should be disposed of
properly.
-
Danger of explosion if battery is incorrectly replaced. Replace only with
the same or equivalent type.
-
Incorrect use of batteries can cause electrolyte leakage
and will corrode the compartment or cause the batteries to burst.
Downloaded From Disc-Player.com Philips Manuals
PREPARATIONS