Plasma Torch - Kjellberg CUTi 70 Instruction Manual

Pos: 9.17 /Überschriften/1.1.1/Plasmabrenner @ 0\mod_1197630447123_6.doc @ 1770
3.1.4

Plasma torch

Pos: 9.18 /Wartung/Plasmabrenner @ 0\mod_1199372283358_19.doc @ 2284
The plasma torches have to be handled with care. Powerful treatment and stress load have to be avoided.
All consumables have to be in clean condition and carefully changed in time (see instruction manual of the
Plasma Machine Torch).
Damages of parts inside the torch, like nozzle holder and cathode tube have to be avoided.
Besides the change of consumables by using the special torch tools no other action to the torch
head is allowed! Plasma torches must be transported and stored at protected places with full inserted parts
on the torch head only!
Hose parcels have to be protected against damages, like sharp bending, twisting, over rolling, and thermal
damages as well. The cleanness of the small filters in the gas connections has to be checked regularly at the
plasma machine torch. The small filter is to be screwed in with the thread forward into the connection of the
respective gas hose
Pos: 9.19 /Warnung, Vorsicht, Verbot, Gebot, Hinweis/Warnung (orange) / Rettungszeichen (grün)/Öl-und fettfreier Brenner @ 0\mod_1199373195000_19.doc @ 2300
All components and parts coming in touch with oxygen have to be kept free of oil and
grease!
This refers specially to the torch head and the consumables.
Pos: 9.20 /Warnung, Vorsicht, Verbot, Gebot, Hinweis/Gebotszeichen (blau)/Original-Kjellberg-Verschleißteile @ 0\mod_1202913276255_19.doc @ 3649
You are only allowed to use ORIGINAL Kjellberg spare parts and consumables!
The use of other manufacturer consumables leads to the loss of the warranty claim.
Pos: 10 /--------------- Seitenumbruch --------------- @ 0\mod_1197390577023_6.doc @ 1452
22
WARNING